Leaderboard

Got em all out without breaking any - I don't think Ive stripped the holes either but haven't cleaned it up yet. For this really tough bolt I decided to use a "paint stripper" heat gun on high for about 15 minutes and it still wouldn't budge so drilled a 2nd hole down closer to the threads, earlier had drilled a hole about in the middle of the column to get the penetrating oil down into the crud in the bottom inch of the column also. After drilling this second hole and then using a lot of penetrating oil, then heat, I had progress had to heat up down by the head for at least 10 minutes with paint stripper heat gun, that's why my aluminum shield has turned golden brown .. I tried a M.A.P. torch but it was to scary and causing way to much smoke for my comfort.. and wiggled back and forth tell I could get about 1/4 turn, came back next day tried it cold no t so much movement so heated it up again and kept working it back and forth - but not going as far in as out.. then add more sauce.. do it again and eventually.. Here's the bolt right after I got it out - I used a lot of B'laster penetration oil, and couldn't get it moving with the 3/8" impact gun - had to really push and pull on this ratchet - really hoping the bolt wouldn't break,, kind of amazed it didn't

Sounds like we’re the same type of uhh ……enthusiasts. But I’d stop short of the 360. With me it’s the early 70’s now. I’ve got my 73 Coupe and 77 stage one 4WD wagon. And my daily is a 94 same as you’re taking on, 2.2 first generation Legacy. Probably the best car they ever gave us. Enjoy ! Let me know what you need. Right now I’m cleaning house in major fashion and I’ve got boxes of 90-94 Legacy parts I could easily just donate and other items very cheap. I need space. In case you didn’t know this your car is the same nose as a 1990-91 but in 92-94 they change the lights etc. Folks refer to that as the “facelift” years. I have a very nice set of headlights for yours. Enjoy that 2.2