Fatz

ej22 vtd auto 4.44 vlsd 3" lift 27s ej20TT vtd auto 4.44 vlsd 6" lift, lots of cutting and 31's

cheers guys phin- yeah i havent finished with the guards yet. just whacked them on. will sprouse it up sometime:P

Ok here is another small update. Still have a little to do. I fitted some flares a month or so ago. I used conveyor belt and some 2mm steel. I welded the steel to the body and then bolted the rubber to the steel. Still have to mount scoop and do some reinforcements of the castor lift. I also got a straight through exhaust fitted, but I'm not happy with the location so im going to get it re routed sometime soon. Note: I'm not going to keep the current breathing setup, going to go to a dual snorkel setup. Enjoy

Hey mate. Wouldnt have been me you saw. I havent taken this car to dev as of yet. Not since ive rebuilt it anyways:)

hehe. Merry Christmas buddy. well overdue for a meet up. Tyres are 31x10.5r15

Hey guys. Small update. I have nearly finished! got some new rubber to bring the offset in a bit, now im running some MT Baja claws. IMO looks good. Car drives really well. Has alot more go than my gtb for some reason. Had a few issues due to my incompetence. took it for a drive without tightening the powersteering lines and trans cooler lines. VERY messy. POP. ill leave the rest to your imagination.. i have fixed that now and sall good. Rubber just rubs on front a 3/4 lock. Bit more grinder work and shell be apples. I'd like to say thanks to johhny for coming up and helping out. Couldnt have done it without you. Id also like to thank everyone else who has helped me out over the past couple of months. Here are some pics of it crawling around the street. Do enjoy Overall im very happy with how it has turned out.

teehee thanks guys el toro i have a spare plate lying about somewhere, ill snap up some pics for you. if i cant find it, ill just take some more of the one there atm.

Here is the final product. Looks pretty mean aye

Ok guys. Small update, and a couple of pics. I will be uploading more tonight when i get all 4 wheels on. I just got my new prezzies in the mail, so i thought at lunch time id had a looky and put one one. Have a look, and a laugh, i certainly did. Floor seal just behind tyre sits at 27cm and the roof sits at 71cm, or bout 5"10. Pretty bloody big.

Gunna be a tight fit Real tight Too tight. Out came the grinder.....again Teehee Some assembly done Mmm fun Ahh. all done. Very happy

Well Well Well, I spose its that time again. Had a pretty good weekend overall. Couldn't of done it without the exceptional help of Will, Josh and John. Got a comfy amount done over the 2 days. Modded the radiator support to allow a EJ radiator fit, Made up a gearbox crossmember Swapped over engine crossmember Put in the engine Wired the engine in Fixed some fuel lines and last but not least. Drank and had a good time. Here are some pics, and i have a video too that I'll put up later on of it starting and running. Thanks again for all your hard work. Still have ALOT of work to do before i can drive it. Anyhow. Enjoy the pics. Will getting down and dity Getting everything ready for the grinder. Gearbox crossmember that john and myself whipped up. Will releasing some suppressed anger Lovely fit Johnny building up some anger __________________

Damn, 30 inches.. That sounds sexy. Mine has 20" clearance with 27s under it.. Hoping to put 31s under in a month or so..

Top hat. Newer rubber. Some free space. Clearance Hrmm. Quick shot from rear door. Doesn't justify how big it really is

Ok fellas, Just finished the lift. Tis rather big put it all together to find out the gtb brakes i have are too large for my rims So i temporarily have put in the hubs with Lib brake setup. No real dramas tonight. Big of strut tower bashin and filing. nothing unexpected though. I snapped up a couple of pics, nothing too interesting as my shed is now full of **** and i cant move:P Also its about 0 degrees out there and becoming unpleasant. Anyhow, here are a couple of pics. Dont know how high she sits, dont have a tape, but i can tell u with the nankangs on, i can have a jack stands at full ext and still about 4cm from the body. Enjoy. The process of swapping hubs over. Turned out to be a waste of time! Some incentive to finish quickly. Need to get rid of this tab in order to place blocks on top. All gone.