moosens

Awesome list there !! Good for you man, doing it right not minding the $$

Only thing I’ve found that I would be works is the part number for the FF1 tank plug. Being a Subaru I’m guessing that bolt stayed the same through the next couple of generations. p/n 6421 28000 Thats the original part number. By now there was likely a superseded number. But a good parts guy can dig and find out.

And Jim , I’ve recently jumped ship from Town Fair to Firestone. For what that’s worth to ya. TF offers great deals but for a few reasons I’m avoiding them now. I won’t trash them badly but let’s just say there seems to be more attentive employees at the Fairfield Firestone and they also offer some great deals. I suggest getting the lifetime alignment deal. Hope to see you around. Cheers!

That gets reply of the month award hands down. Jim , just hoping you don’t go too cheap. Not worth it. Best of luck. Bad year for potholes too. Maybe hold off until repairs are complete usually around May 1 speaking from an urban perspective.

Sweet ! yes the third gear thing , synchro n/g and throws it back at ya too. Good luck on the five speed swap.

Well if there’s some time constraints I guess that’s ok. Just seems too easy to have to bypass but you’re the one who’s exhausted yourself. Having a hard time figuring why you can’t score the correct bolt. I’d be money there’s a bolt on your vehicle that is the same size and thread pitch. At least if you found one you could then read the size and pitch. Seems weird that nobody has a bolt plug , nobody has a tank laying around , and nobody has ever checked the size.

For sure I also try my best to avoid FB. And I don’t use their messenger service since they are already too intrusive. More in that some other time. Greyhound , the bus people , they also do shipping. Many of us have used them for large items. Just need to pick up at the local terminal. Cost effective if you need a hood , large panel , etc. Talk soon. Cheers!

One group good for parts. https://m.facebook.com/groups/730768337106149/?ref=bookmarks The USMB on fb https://m.facebook.com/groups/UltimateSubaruMessageBoard/?ref=bookmarks Good luck. Nothing like solid panels and solid cars. I’ve used Greyhound for panels and had great experiences.

Cool , keep in touch and we’ll get together soon enough. Search for those doors out west and save the effort if they’re really bad. Any two door works. You probably knew that. Just swap Brat glass over. This board was quite active before the masses were lured over to the current attraction. You knew that too. ;) Talk soon.

Across the little pond from you in Bridgeport CT. Good luck in your retirement and with your project Brat. Whatever I find that may help you I’ll gladly contribute. Currently I am cleaning house of 1970-79 parts. Unfortunately for you and the other later Subaru owners I already purged most of my later parts for 1980-84 and 1985-94. But some stuff still pops up now and then. Come warm weather I’ll be back at it. As for hobbies to go with the Brat , for me it was archery and before that firearm deer hunting. Whatever your hobbies I hope the Brat shows itself well someday for you. My concern from reading your post is what the covers may have done to inhibit rust. Best wishes on that account. My storage is in Milford just off I-95 , maybe we’ll meet up there this spring. I know I have a gen 2 front “A” bar. Enjoy ! Paul

Kind of working in reverse , have you yet tried to jump the fuel pump with a couple of leads from the battery ? Check the archives ? I know that gets annoying so I understand if you didn’t strike gold if you did. From horrible memory I want to say 3psi is fine. Not sure you’d require a significantly more powerful pump with a stock Hitachi.

Good luck. I already looked. If anyone does find that plug please let me know where you saw it. I have all factory parts manuals from the 360 thru the Loyale and then some.

Camera time ? Get one of those cheapie harbor fright versions if nobody gives a great answer. I sure don’t have one at this time. If you’re going at this seriously I want to suggest taking the tank out. While out go over the body/bed and all you can. Mark your lines , take pics of it all.

No but depending on which line there may be an anti-roll system installed like the 4WD wagons. At work but I’ll try to help from the manual later. Nothing in the tank like later models. Just the obvious meter/float.

I hope you meant ozium and not ozone. VT car ? Semi- Trashed - sorry to be negative but what you mention about Pittsburgh cars you should multiply that for VT. Plenty of friend in VT and when they come down here they have rust on 5 year old cars. I completely understand about making the most of what you’ve got. I live and will likely die by being a user of aged Subarus. And I live in New England. So these type of vehicles have come and gone. Use it and dispose of it before dumping tons of money into it , because there’s always more coming down the pike. Best of luck with it.

Those seats look like GL-10 $4k opening bid , or maybe low opening but $4k reserve.Just my opinion BAT seems to draw the more serious buyer. You’ll do well. Enjoy !

Looks nice! From here that looks like an uncracked dashboard. If so you want to baby it.

My parts manual does not show the drain plug. If it does and I’m not seeing it , they still don’t list any size within the Part Name column where sizes are always shown when applicable.

Yeah I just tried too and got frustrated very quickly. Hang in there. Simple enough info. My guess would be that it’s the same size as something like the crank pulley bolt or a suspension bolt. In case you want to try to remove one and see if it’s the same size. Then you can walk into the nut n bolt shop with confidence.

Dammit , I forgot again and I even looked right at my pile of manuals. Sorry about that. But it seems you’re commanding the situation. Suggesting that you look in all corners of the interior. Maybe that guy tucked it away. And after that I will try to put my brain on when I get home and check the manual.

Spring hooks can be handy here. Long needle nose or duckbill pliers and a rubber band to help keep pliers closed while you free up a hand. Just foggy memories but getting that plastic retainer hooked up right that’s where the spring hook used to really help.

Sorry I forgot to check. Will do in the morning or shortly after. You might be able to beat me to it. I think there’s online pdf. file of the older parts manuals.

She’s a beauty !!

So you don’t have one at all ? When I get to my manuals I will check to see if they declare the size and thread pitch.

It’s ok you’ll be fine. Nothing falls apart.