dragonfire

sweet man i am trying myslef to fit up something to my 88 gl sedan . first i was trying to get some stock parts but no luck there.lookin like i will have to find the toyota like you are saying to get what i am lookin for. maybe i will get lucky on the stock stuff. hope you find that wagon and welcome to the usmb.

:slobber: :slobber: sweet rig. the way it should be.

aww look my gl has i little cousin. damn nice car. i have an 88 gl same color same wheels mine are black though. same center caps. as for the sound w/ac on i am going to say pinging cause mine does the same when i use the ac and low octane. but i also have 312,xxx miles on her. I run 89 octane or higher and the pinging all but goes away. a little lucas fuel system treatment worked wonders for me. good luck with the new soob.:cool:

:slobber: a pair of the gl emblems would great for my gl, even though it is an 88. historic badges on an old gen soob. hmmmm:brow:

there are patches? damn something else to add to my subaru list.

http://www.jamstrait.com and www.superbrightleds.com you should be able to find what you are looking for there. if you cant find let me know. i found just about every bulb for my 88 gl between both sites.

I explained the process here http://www.ultimatesubaru.org/forum/showthread.php?t=60027&highlight=impreza+seat+swap Kevin i got that far but for some reason the seat will lock only on the handle side and the right side still moves, have you run into that problem? i think maybe the legacy seat may be to heavy??? well lets just say that custom fitting will be called for if no solution can be found for the right side not locking. thanks for the link. that was a big help getting the rails installed usmb does it again.

mine is also located under the hood as well, but.... my manual says there is another on the right side next to the trailing arm. is that correct? 1988 gl 1.8 n/a

sweet can you say road trip in the truck.

yeah that was the car i was talking about:grin: . just not in the cards for me just yet. hopefully when the time comes i may just get lucky enough:burnout:

:slobber: :slobber: :slobber: :slobber: :slobber: ok lets say i would like to have an rx. was not at the top of my list. then i saw this one. went from middle of this list shot striaght to the top. bumped my truck out of first place. that is a really nice car. yes the rx is rare. so finding one is very frustrating. now i live in florida so mutiply that by ten:banghead: . found one but cant afford to buy the car fly to washington state then pay the gas to drive it back:lol: . dont need motel money would sleep in the car. drive it love it oh yeah congrats man.

hmm. so taking out the grill caused it to heat up even more. i was thinking of taking a junkyard grill and putting wire mesh in it. wondering now if i should do that.

my dad and i installed them today. took a little bit of cutting on the 20 year old plastic which some people might not approve, but how many people have legacy seats in their BRAT? i am trying to install legacy seats in my gl. here is what i encountered. with the gl seat rails on the legacy seats the right side rail does not lock and allows the right side of the seat to move while the left is locked in place. did you use legacy rails on yours? or did you use stock rails from your car?

wow, i have not seen a pug like that i liked till now!!!

ok i know i have seen post concerning legacy seats in brats and ea 81's i dont recall seeing anything for ea 82.( i tried a search but i got nothing on this particular subject unless i completly missed) so i bought the legacy seats any way. so this is how far i got. put my seat rails on the legacy seat so i know i have to modify the seat to take the rails. here is my problem. when i installed them i was able to adjust my slider but only one side locks and the other just slides on its own. so if get the seat where i want it the right side of the seat still moves. the legacy seat rails have locks on both sides the ea82 seat rails locks only on one side. has anyone had this problem with their seats from a newer car to an older one like this? is there a solution? thank you for reading this. any help is greatly appreciated.

i get about an average of 31 mpg. but that is suface streets and then the expressway. i do have 312,XXX miles on her so i hope my mileage gets better the more miles i rack up. lets say 40 mpg at 400,000.

nice ride.

wow i see i am not the only one who had that problem. i just finished wiring the power for mine. the wires were cut too short but some sweat and and a few colorful four letter words later:banghead: fixed it. have you ran new speaker wire for the front doors yet? i could use some info on that. i ran out of four letter words yesterday so i stopped for the day. any help is greatly apprecated. thank you

after many trips to many shops. boom found an 18 inch cable. took me two days to get it but damn i did get it. radio shack what a waste they are getting out of the car stereo end of things just home audio.

i have red bulbs i got from advance auto. 4 bucks for 4 lights. the 194. i now have inverted tip blue led. got those from pep boys. the only thing i do not like about the blue, is that the needles do not show up as well. hhhmmm. how to fix that? :-\ cool dash lights man.

same here it has saved quite a few dollars. full gasket set is coming my way soon.

thank you fellas i am on my way to radio shack now to get my cable. as i said it was right in front of me but i was blind to it. thank for very promt responses. Ken

i got my cd player ready for install, found mounting kit in the junkyard of all places. could not find a subie there for the past month. low and behold i went today. long story short i ened up with three of them. now here is the problem the antenna cable is way to short. stock radio location is left side the cd player right side. found one online but need local pick up i search the best buys and walmart online nothing. local shops this afternoon. zip zero nadda any ideas? i know it is right in front of me i just dont see it. :-\ thank you

can cruise be added to a car that did not come from the factory with cruise. i found a gl with cruise thought i might add it to mine. what all would i need to pull with it. does any one know. thank you Ken:grin:

i found motion wheels off an xt in the junkyard decent tires can any body tell what they are worth? i might pick them up. would any board member be intrested in these? 5 lug