-
Posts
3884 -
Joined
-
Last visited
-
Days Won
14
Content Type
Profiles
Forums
Gallery
Store
Everything posted by Uberoo
-
I got to thinking that the only reason I was sidelined for a while was becuase I stuffed the engine into a snowdrift,and water could have been sucked into the engine through the seals.so I drained the oil and of course it was the nastiest mud I have ever seen emerge from a car engine. checked the plugs and they were ok.for some reason its running rich on the drivers side?! So Im gonna flush the oil out and see how it goes. I asked my dad to help figure out for sure what was wrong with it.He said it shouldnt be a headgasket becuase not alot of four bangers idle that smooth if they have headgasket issues.(rock steady at 1000 rpm,gotta turn down idle on weber,or not)
-
10 gauge wire work or do I go bigger:banana:
-
a come along may be slow,but its a hellva lot faster than walking.
-
when you find one let me know.The wipers on my 84 brat are painfully slow.
-
I got a come-a-long and will soon get a nylon strap..
-
Nose Job.. My No Buck progress
Uberoo replied to rllywgn's topic in Old Gen.: 80's GL/DL/XT/Loyales...
the lights look good but it looks like you need to aim them. -
sum bit@h why aint you get me a samitch out the fridge? or we was goin' prutty good then I blewd a tar and dun crashed into athair tree.I spilt my beer all overs my brand new carhartts.sum bit@h!
-
it looks like the jeep is pulling the roo.
-
make the front of the trailer "pivot" so it wont bind when offroad.then have a pin to hold it in the locked position for any street driving.
-
no thanks it gets cold here in the middle of summer for bizare reasons.so i will ditch the rear tailgate (brat) and run a net.not to make it a racecar but so it doesnt pork up when I add bumpers, super swampers,etc.
-
Favorite Subaru Feature.....
Uberoo replied to Sonicfrog's topic in Old Gen.: 80's GL/DL/XT/Loyales...
that it can fit places where atv's go and carry stuff while doing that... so much fun to drive up atv trails when a built chevy couldnt possibly fit! -
im not advocating littering but the mudflap disappeared!!!! probally becuase im not looking at the mudflaps when Im trail riding.
-
I dunno what is more satisfing? being in a super built rock buggy and jumping over obsticles in .00000001 seconds or taking a vehicle that is not super capible just has a good driver to go places the rock buggy could go? Id rather have a full bodied vehicle anyday.takes skill to go places without body damage in a full bodied vehicle. subaru>tube frame....at least in the sense that it takes far more skill to operate one correctly... although 450 hp in something weight a ton :eek: :eek:
-
would 3/16X2" steel flex? Id like to go with flatstock for a cleaner look but...
-
Im gonna fab up a bar out of 3/16" flat stock.should make a decent light bar.My question is this:Should I mount the rack to the rear of the cab(standard pickup offroad light position) or at the leading edge of the cab for better lighting? I plan on putting four rectanglar lights on top and have a tab behide the lights(2X3X3/16 tab) in the middle right behind the lights as a place to mount the CB antenna(have to get job and get it running first). so should I mount to the front of cab or rear edge of cab?
-
so is there any beef around the suspension mounts to put in twin A arms?wont happen imediatly(I have a friend with a metal fabrication shop,unfortunalty he is out of town till june...)
-
what are some pieces of your subaru that has come off never to be found again when offroad? the first time I took my brat on some decent trails I left the passenger side rear mudflap as a sovenier(the hard plastic thing that says 4wd).(MIA) as of now Ive been to lazy to remove the other one.I should so I can kep it for sovenier...so anyway what are some bits that have fallen of your subies when offroad?
-
more lights=needed on the rack also with your snorkel like that be very carefull not to drive into water an anything resembing fast.Your snorkel would suck in the spash:eek:
-
sure!
-
cnc=OVERRATED I could do the same with a good old lathe and mill:lol: i dunno might make engine more powerful by reducing rotating inertia...
-
The overweight Lady is about to Sing.
Uberoo replied to robertwheeler's topic in Old Gen.: 80's GL/DL/XT/Loyales...
try welding some plates to hold the body in original place.A lot cheaper than a new car or having to worry about wether or not the back end will colapse.. -
redrill toyota/pugs= 5 AA wheels=1 OH!!! BURN! If AA is listening/viewing lower the price or include rubber with the $400 four rims with super swampers for 400! where do I sign!!! that would be a good discount considering super swampers in that size are just short of 100 a pop. or could creat a combo for like $600 ive seen combo's with X rim and Y tire sell for 4-800 just make the tires 27X9.5X15 super swamper SSR's:banana:
-
you compain to doctor "that it hurts when I do this" doctor says "don't do that" if you are doing burnouts and you have wheelhop then the simple answer is to stop doing burnouts:lol: