edalexandr

o another question how are you getting the pictures on here it say no bigger than 40x 40 ?? i tryed and tryed:banghead:

yeah i was going to use a good synthetic grease hope it cools it down huh

yeah i have a surface temp thing i can put on the hub when it is hot and then i can check it after i re pack the bearings and you know the other day when i was touching the hub i left and came back a few min's later and the hub got a bit hotter i can feel the heat coming off the hub on to my face monday am going to re do the bearings and try it again

o yeah i will not take them out of hubs am just going to re pack them in place and try it hope it runs a bit cooler thanks:cool:

this happen to me before and come to find out it was the sock in the gas tank pick up tube when it ran fast it would suck up on to the sock and when it dies the dirt would fall off and i can re start but drive it slow around town it would run fine this my be your problem shoot who knows:banghead:

the bearings should be still fine cause i did not drive it more than less say 5 miles so am just going to take it back apart and put in alot of good grease

yeah am going to when i did try to touch it the disk was not hot as bad as right in the center right where the bearings are even the calpiers was not very hot just the hub part:banghead:

thanks i will check the can;)

sould i use a different type of grease?

well i just use grease grease ??

bump:banghead:

yeah i put in alot of grease and it gets hot you can touch it for about 3 seconds is this to hot?

hello i just replace the front bearings in my brat the driver side last month and the right side 3 days ago and now i see that the bearings are getting hot is this right i put in new seals and good grease how can i fix this problem ?? help me:boohoo: