newsoobdude

Sic man SIC!!!!!!!! That is one bad a** Legacy you got there and one HELL of an ol' lady. Don't ever let her go!

Does anyone know where to get a filler plate for a single din radio and the EA82? My OEM radio is gone and want to replace it but cannot find an adapter plate for one.

Yeah, I originally picked them up for parts seperately but since they are so nice (this one more so) I decided not to strip them at the time but now I'll strip the original one I got. Picked them up for $350 and $150 respectively.

Picked this up to use for parts for my other 86 GL Wagon, but since this one is in overall better shape rust wise I'll cut up my other one. The only problem with this one is a bad motor. Look! Twins! Plans still include an EJ swap, T-case lift (come on Scott make it happen:grin: ), 6 lug conversion, rear disks, and more!

Talk about no fun!! Guess if and when I get one I know one of the first mods- MANUAL transmission:grin:

Man, that will be sweet when done!!! What are you using for a frame??? Keep us ALL posted on your progress and be sure to take MANY pics:headbang:

Not to hi-jack or anything but doesn't someone in Colorado I believe have the jig for the Warn Subaru winch bumper???

Being a stupid newb to Subies and motors in general, just wondering where a good place is to get some EA71 connecting rods (new preferred)? I'm not sure if anyone but good ol Subaru made/ makes them and don't want to spend a fortune on them. Any help would be greatly appreciated.

Thanks everyone! I'm hoping one day to get one for myself. Hatchsub- What are the differences between them and any other EA81 (primarily drivetrain wise)? Anyone know of any in 4WD or are they all 2WD?

I know Subaru made them. Anyone see/ know of any left in the States? Anyone have pics of any? All I ever see are the Wagons (and Brats and the occasional Coupes) in my neck of the woods (and here on the board). I'd like to eventually find one but have yet to see any except for in Subaru ads. Anyone have any info on them? Any help would be appreciated.

I would DEFINATELY agree with you on that one. Down side is cannot afford to move out of CA anytime soon. TheSubaruJunkie- I'm a hop, skip, and jump south of you, good ol Amador County. Hwy 88 & 49. Will see what happens if I decide to add another car to my growing list. Thanks for input everyone.

Man does that look NICE!!! But, is it just me or the weird angle of the pic or is the passenger side a little further away from the drivers side? Definatly gotta put some more lights on her. But man, again looks nice.

I'm looking at an 82 Brat from out of state. My ONLY concern is getting it to PASS CA's sh*ty SMOG test . What all is needed to do this? I thankfully have access to PLENTY of spare parts/ cars.

I definately agree with the trailer axle placement but, thats why the more I look at it the more I want to do trailer number 2, just longer on the rear overhang (as long as it take to make my bike fit). It's a shame my mike won't fit w/o hanging over with the trailer being from the B pillar back. As for the IRS, haven't gotten that far and might just rob some FWD rear "axle" and shove it under their. This is what I was thinking- Mind you the tongue will start right infront of the cut off and (hopefully) extend no more than three feet (I'm thinking tent trailer style). We'll see what happens when I start cutting everything up and I definately see your point

Heres my ideas Trailer one- Trailer two- Comparison- Trailer one is for my dirt bike and will have operational rear doors for storage under the floor. Trailer two is for moving junk around and will have the hatch welded shut (figure giant wheel barrow) and rear quarters extened 6 inches. What do ya'll think?

So, I've been really thinking about this the last couple of days and hears what I've come up with plan wise for the body Trailer one (for my bike) will be cut somewhere in the middle of the front door, have the hatch butchered to fill in the "gap" above tail lights, use part of the roof for the front wall (or if I can, con my friend into letting me cut up his totalled Brat for the cab wall), leave the back doors operational for storage under the floor (with access also from the front). Trailer Two will be for hauling junk around and have basically the same mods MINUS the fact of being cut just infront of the B-pillars, extending the rear behind the wheels around 6 inches or so and hacking the hatch in half and welding closed. They both might recieve a 4 inch lift for more ground clearance (especially trailer one). Comparison shot What do ya'll think? If all goes well I've have my other 86 Wagon mid-June and cut up by mid-July:headbang:

Get some pics up. I might be joining you on a similar project or 2 so I can tow my bike around before my Brat is done and have another one for camping w/ my bike and Brat (when done).

I've searched and searched and cannot find a difinitive answer so.... DO 14 inch Pug Alloys require special lug nuts or will the original Subaru ligs work? Simple yes, original Subaru will work or no, special lugs required.

Alright. I'm a stupid newbie when it comes to Roos (I'll be the first to admit it) and all and since my Brat is STILL down for the count (headgaskets), I'm wondering about the DOJs from an EA82 on an EA81. What are they and how do I do it? It seems they help increase wheel travel and since my Brat will be getting an SJR 4 or 6 inch lift, I'd like to increase the wheel travel as well and make this thing overall stronger. Did I mention I have a parts EA82 4X4 and might be getting a 90 4X4 also for parts, plus access to more EA82s for parts and goodies? Any help would be greatly appreciated.

Got any pics of these trailers, particularly the car trailer? I'm thinking about cutting up one of my wagons or another one or two I might be getting so I can haul my bike around w/o my Brat (it's going to be longer than I thought on it), and besides, it's noce to have a trailer to haul more than a bed full of goodies:grin:

My 98 from factory De-stickered Notice the wheel well lips and above the door rub strip. It's a shame the wheel well lips have the "overspray" on them but oh well.

Man, that looks GOOD!!! Now I know how I want my Wagon to look (still gotta figure out the Brat)

I would love to wave to the people I see driving by in their subies, but a major majority of them are gray haired and don't like the fact I'm checking out their ride as they drive by. The other folks are just regular people and don't pay attention to me in my LOB dd, but since I've been driving my 86 the last few days I've gotten some attention (mostly yelled at or gawked at) becuse it's LOUD and looks like a piece with some good stickers. Oh well, when my Brat is done I'll be gawked at too.

Man, that does look good, been trying to get my friend to do it to his 6. IF he decides to get rid of his XT6 I might grab it from it and that would be one of my first mods (never did like the pop ups).

Just an FYI for those that might be intersted in removing the two tone stickers from their BGs. Before sticker removal- After the sticker removal-