spokanesoob

i NEED a up pipe for the turbo ASAP mine broke and i cannot find one anywere can some one in the spokane are please help me !!! its for a 88rx ea82 turbo !

maybe i would be up for it work has to let me out of the cage first

i wanted a pod but i was lacking in the funds department plus i useally have a Co- well back seat driver lol

haha sweet deal i want a lifted hatch i miss my old hatch i never have lifted something but i get the basics im pretty good with motors and such i havnt realy played around with suspension and all that jazzy

yeah i hear that :cool: we upper washingtonions and idahoians seem kinda un organized well i know i am

on my car i had major cracks run from the exaust port down into the manifold those cracks if deep enough lead right into the water jacket behind them then you get steam and water out of the exaust and a coolant goes missing if you have had the heads pressure checked and they passed there shouldnt be cracks of that size there assuming you went to a honest head shop :-\

its close to the end i will look into gettin a new one i also need a new clutch return spring too

i just did the gear oil on it bout 4K ago maybe it is my clutch cable stretchin out could that cause it or is that out of the question

:-\ eh me either i want to get another hatch so i can go wheelin again i work too much nowdays to have fun though

idk bout the tranny never drove it but its a dx

SO.... pretty sure my tranny is on its way out not quite certian i tryed messin with my clutch adjustemnt but its a new clutch and pressure plate. anyways second and third gear grind when i put it in its like the gears are havin trouble meshin so im thinkin syncros? if i step on the break it usually goes in no prob or if i take it super slow it goes in with out a prob. so if i do need a new tranny i was wonderin..... i would hate to loose my full time awd so is there any way i could put the rx diff on say a single range turbo tranny? and make it just like the rx one? or is there no possabilty am i doomed to to look for ever for a rx tranny. :-\ i apolozige if this is a repeat question i searched but found nothing thanks spokane soob 88rx ea82t

i went up messin round yester day and crashed it :-\ but it was farily easy to read what was goin on its kinda right in the line of sight so its just a quick glance down as far as wirein i just used the clock wiring cuz it was broken anyways so i used the lighting wire and the pos and the neg for the volts then drilled holes thru the fire wall for all the engine bay stuff now i need a new fender though and a bumper whoops too fast round a corner

i decided i wanted some gauges but no place to put them so i bought a hole saw here is the finished product and this is what they are in one more

the hood is all messed up it got blown off cuz the latch is broken so its a junkyard hood with nothing on it i will check the sticker on the firewall but no idea what distys will work in it?

gonna be buyin one soon with a bad disty. what disty will fit in it? i THINK its the 1.6 but not positive or not even sure how to tell the engine size. thanks Spokanesoob