TheLoyale

I am now debating on either drilling the Wheel, or the hub... Hmm. Does anyone have a picture of a redrilled hub? The front/disc style would be more helpful.

Here is a good thread about drilling Wheels and Hubs, good ideas to be had there. http://www.ultimatesubaru.org/forum/showthread.php?t=131874

This is how a 2" plus 27" tires sit. 12" under rear diff, 16" under center of car.

3-7/8" should be just fine, Stock Subaru caps might even clip in the hole.

MPFI Turbo eh? Cool!

Here we use these lights mostly for Plow trucks (Snow removal) also the Park and Rec uses them on their Jeeps to notify to use caution. I kinda had a rescue vehicle in mind when I added some stuff to the Legacy, Yellow/Black strip tape, Orange safety light, Tow hitch, and ground clearance.

The final video.

I'm sorry, but the front end kinda looks like a mess. Too many sharp lines, and no blended well. But it is a T-wagon!

Awesome! Maybe I'll regain my eye sight by then. The tank will probably be all crushed due to transit, cause we all know how good the USPS is

This looks really good! Keep it up!!!

Whats in the Works: Loyale front brake set up Turbo rear disc setup 16" Steely wheels Subruise sent out the Tank and Rockers today! And is seeing about rear discs for me

The Colorado wheels probably have a closer offset to the Subarus, mainly its the old 70s/80s GM wheels which stick out a lot

Chevy wheels have a very incorrect offset and will stick out of the wheel well, and will result in cutting the fenders drastically, fyi. As for filling holes, good thought on possible warpage of the rim.

What are the front fenders like on that Hatch? Rotted and missing sections?

Not an EA81 but, my Loyale only used little over 1/4 tank going to and coming back from Beliot, which is 60+ miles each way, put on about 124miles. I was running it at 4500rpm at 80mph most of the way back. I also have 27" tires and a roof rack, so its not the most economical. lol.

Which is why I pushed my car up to 4500rpm and started passing the people whom passed me Lol! I can't imagine what it sounded like as I passed them. Although, this car is not squirrly with these heavier wider tires!

Either way, if I'm going 65mph on the interstate, people still pass me at whole sale.

Mine are actually slightly bigger then yours (Thats what she said) (My Spare Grabber is a little smaller then the Bighorns) I checked my speed via Speed radar on the side of the road, but god only knows how accurate that really is lol...

You have dunes in MI? I don't think we have them in WI? We also don't have any OHV/ORV parts either.

Thats funny, the valve covers I got are from a Hydro lifter motor as well. Hmmm. Guess they got lazy on mine

How come your Valve covers have the Fuji stamping and mine don't?

Happy easter from Wisconsin, where Subarus are rotted, tall and slow!

Yes. Doesn't really matter since I'm going with the 16" Spokes.

I agree with the 2nd site as well. I will check it out when I order. Did some more welding today, I was on a roll once I got started. I am also planning on picking up EA82 Front struts, Knuckles, Axles, Brakes from Dodge Aries K. I plan on swapping the larger EA82 front brakes onto the GL at some point, I might also be getting onto a rear disc set up from Subruise as well. The rear disc might either go on this car, or the Loyale, Or I'll pick up a second set and swap both vehicles.