SubaruJawn

drivers side window does not work. and believe its the motor. so would an XT6 Motor work ? what about a Loyale motor ? i would like to get the drivers side window fixed. John

Whoa that car is hAWt.ta.ta.ta i don't think I'll ever get one. maybe in 15 Years

Its in PA part the rust Belt..so yeah its gonna have Rust :-\

any outback struts ? would 95/96 Outback Struts work ?

Hey GD looks Like it has Rear Disc. I'm not entirely sure so I'll post the pictures i took. i can see clean area were the brake pad would rub on rotor i cant pull anything till the Weekend.

ok. and i dont think i'll be tearing this subaru apart. its way to nice. i drove it 6 miles and runs perfect but said it leak antifreeze (no problem) oil leak above caty converter..any one have an idea were the leak could be ? and tie rod end (no problem) Pictures:

in the pictures. it shows both legacies are GEN 1. i attached Gen 2 picture of the one like I'm gonna get Tonight.

My Legacy has the EJ22 and so does the other Legacy here in US we didn't get the Push button 4wd or the Dual range. so that's out. now i am confused. the tranny wont and will in a Gen1 so which is it

got that right! well.....i could scrap it for less than what i paid for it:-\ not gonna happen btw it runs and drives. known issues: Oil leak above Caty...thinking its a Cam seal) Leaks Antifreeze and Lose Tie Rod End

well the car is pretty much mine.. well my fathers till i pay him back for it. $140 for it. i'll do transfer monday. fromt their i dunno if its gonna be a parts car or a fix and sell

ok good to know. this gen 2 i speak of is a Regular Legacy "L" and its a Sedan. my gen 1 is a Regular Legacy "L" is a Wagon 5spd i know the trans wouldn't work. but figured i could sell it and wanted to know a gen2 would work in a Gen 1. i might and might not end up with it. i will find out tomorrow morning. odd... LOL modify the headlights and Hood to fit Gen 1

After a Cleaning, Waxing and Change of Rims. here is what my Legacy Looks Like now. Parked down at the Fire Hall. just like i did Scubert Xt 8)

in the old days. i got this front my father Front Clip Meaning: Hood,Fenders Headlights Everything in front. Rewiring ? major ? Rotors i think they would be the same. it runs the same 14" Rims i dont know Gen 2 Legacy. what else would work ? Windshield ? Doors ? Steering Wheel ? Transmission ?

whats all compatible from a gen 2 legacy to a Gen 1 Legacy ? would the front clip work ? Engine ? Shocks ? rotors ? struts ? Seats ? Thanks much John

Are These The Original Factory Wires ? Yazaki 1989 R-16-AIPS the car has over 203,000 Miles -John

Update: Oil Coating Painted Grill Primed Fenders Painted Fenders End Result:

Update: fixed backup light Tarred Underside (typical areas only) Put XT6 Rims on Pictures: changed the air box: to Cotton Cone Filter: Problems to fix yet: Drivers Door doesn't shut Properly (don't have a Fing Clue how to fix) Drivers Side Window (believe its the motor after some tests)

New Sticker. Pass PA's Strict Inspection Changed the Fenders. of my old 91 Legacy i stripped

yes. and it has been done.

this is good question. i am wonder this my self. i to just got a Subaru Legacy Gen 1. have 185/70 R14" at the moment. i want to put 215/70 R14"s on it. already know that's not gonna happen without any sort of Mod. 185/70 R14: 24.2" Tall 215/75 R14: 25.9" Alternate size: 205/75 R14 26.1" Link to Tire Size Calculator: http://www.miata.net/garage/tirecalc.html

the car had of been hit in such a way that caused the top mount were radiator bolts to bend back. since that's were the hood latch mounts it causes prevention of the hood latching. i bend it forward and when hood comes down just pushes the latch back preventing it from latching with the hood. i managed to make it stay and the hood did latch. now how to make a permanent way to prevent that bar from bending back again:confused:

Hey All Well Since got another Road Legal Subaru time to start another Thread. just like Scubert's anything wrong that i need help with will be posted Here. Now i do need help with: Driver side Power Window. it doesn't work up or down (currently up) Passenger Mirror (both didn't blown fuse changed it and now only passenger) Hood Latch any ideas on how to fix ? Specs: 1990 Subaru Legacy L Fulltime 4WD 5 Speed Manual 2.2L 16 Valve H4 185/70 R14's 202,649 Miles When i got it Pictures of My Legacy: BEFORE: PROGRESS: Now: Painted Grill,Cleaned off Hood & Washed The car Removed Stickers Clean Up Interior Alittle Dash Miles Added

This Project My Continue. on my Recent 1990 Subaru Legacy. just got today. Cleaned up the car alittle removed some stickers will have all removed eventually Edit: Pictures i yet have much more cleaning to do. as for the hood. it was coming up on me when driving it back. luckily i was able to prevent it from coming up and hitting the Windshield (has happened to me before) and side marker was only duck tapped in and had to remove it before it fell off and broke. other than that He Ran Like a Charm! 210 Miles no Mechanical problems

someone on here makes them. i got mine threw a friend.