STi 22B

Not sure what you meen? but with our righthand drive models the blower/fan box is on the far left, then to the right is the a/c box (if fitted, if not it has a piece of convoluted pipe) and then into the centre heater box. In the fan box it has a flap at the top which is controlled by the 2 buttons you are asking about. The flap changes from inside cabin air to fresh outside air. ok... I'll try and put the pics on my user page photos

Kiwi Subbie and Nipper are correct... The system is vacuum controled to a panel flap at the top of the heater fan box. Can supply some pics if you need?

And are they available for the twin headlight setup?

That sounds like a good idea Do they come in 13"?

AWESOME !!! I like it What brand are the tyres? and are they 13" or 14" ? They look like 13"s but I've never seen them like that here in Oz... I'd like to buy a set for my DL wagon :cool:

Nice I hope the heater was working?

Swwwwwwwwweeeeeeeeeeeeet...

Not sure about the wiring but you shouldn't need too much to make something up... of cause you'll need the wiring diagrams That's not the main reason for my reply... I would like to see more pics of the yellow Brumby (Brat), Cheers

Ok... No wuckin forries... That's for your help. I just got your email, cheers, I'll read it now and reply to you soon.

Excellent... That looks like a good number I better check my emails

Nice... You didn't happen to see the engine number on any paperwork did you?

Hey Eric... on the EA81 the engine number should be just forward of the EA81 casting ID. If standing in front looking at the engine it will be between the crank pulley and the intake manifold (and a little left) on the block. Ta

This is probably the wrong time of the year to ask but if you have some fine days, are you able to have the windows open and let the interior dry out a bit?

SHORTAGE!! that's putting it mildly... I know of only 2 in my state and I'd say there's only a dozen in the whole of Oz. Very, Very nice work Eric Please email me with some details so I can pay you and get the Chassis and Engine number off you Cheers Mate... I'll shout you a beer but I'll have to drink it for you

Hey Eric... don't be sorry, Im just really happy you found 1 for me. I have waited 4 years to get mine back on the road, so I'm in no hurry, just excited

Hey Eric... Sorry if I'm a little early but have you had a chance to take some more pics??

Do you boys get the EJ25 SOHC model?? this is the engine most of the guys over here are using... Nice low down torque

We had the same problem with one of our subies down under... well actually, it has happened quiet a few times We found it to be the inner cv joint on the axle... some of the aftermarket joints are made up with a tripod design bearing inside the cup. When we fitted either 1 to the left or right, we had vibration at low speeds and when we had replaced both sides, there was a terrible hominics throughout the whole car at higher speeds. Disclaimer: This may not be the answer... If not, blame global warming

I'm not sure but please correct me if I'm wrong If you are thinking of putting a EA82T into the spot where a EA81 came out?? Well, from what I recall someone over here in Oz, tried it and the engine fitted the bolt up pattern but the problems was the space? because the EA82 has OHC's, it made the engine very... and I mean VERY close to the chassis rails Which was fine unless a engine mount broke

I'll do what I can to help you boyz :cool: It's the least I can do, to repay all your help... Cheers

Any thing you boyz need... you just ask and I'll be happy to help

I know of a place in my home town that (last time I was there) has a box load of these... I can check for you boyz but I'm at work till the January 18th, 2008

That's great news... Thanks Eric I would like, if possible I like to have some pics of the inside, cheers. I'm going to need Chassis Number and Engine Number as soon as possible, as I need to get approval from the Australian Imports Vehicle Approval Department (Govt Sh*t) done before the car is sent from the States

Subaru's Only... until I saw the new R36 GTR Skyline, I didn't there was another car that was worth riding in http://www.edmunds.com/il/nissan/skyline/ This Nissan is pure porn but I'd never sell out my loyalty to Subi's

SOLD !!! That is the exact one I need... with the plastic front and rear bumpers Thanks Heaps Eric Please email me when you have seen the title. Sorry to anyone else that is interested but I have been searching for a very long time to get my little hatch back on the road and this hatch will finally make this happen :cool: