subuaroodude
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Posts posted by subuaroodude
-
-
Check with pull-a-part in lynnwood, open weekends and always lots of sub's.
-
Just to clear things up:
http://www.engineersedge.com/lubrication/lubrication_knowledge_menu.shtml
As grease does not dissapate heat well packing a hub full can lead to overheating in some cases depending on components and loads, best to follow manuf guide lines.
-
-
Not an answer to your question, but possibly an answer for your problem. http://moroso.com/catalog/categorydisplay.asp?catcode=22005ave
I have used this product with great success, but I would by pas the heater core before using.
Good luck!
-
Hi Rise is a front for Subaru enthuiests. They make kits, but a key player is in the hospital. Byb kits are avail, but shipping to the us averages 350.00 bucks us. I'm considering a sjr lift myself. What I like about Byb's is 3" lift, no steer shaft extension, no longer shocks required and stock cv joint geometry. A 3" lift for the "L" series sells with shipping for just under 840.00 bucks at the current au dollar to us dollar exchange rate. I will have to get a line on longer shocks ( never heard of them ). Anyone have any info on these?
-
Check out your aux air valve for proper functionhttp://www.ch601.org/engines.htm
It sits on top of the thermostat housing and functions as the choke. If it is not working properly or the hose to the air duct is bad your " choke " is on all the time.
Subaru Overheating - can't figure out why
in 1990 to Present Legacy, Impreza, Outback, Forester, Baja, WRX&WrxSTI, SVX
Posted
Unfortunately head gasket problems are just part of owning a subaru. Using oem t-stats are a must...and adding an auxilary temp gauge and sender ( best quality you can find ) is a good idea as the subaru temp gauges are as poorly engineered as their cooling systems ( just check your owners manual description of how the gauge should read ) I hope this is not the case, good luck