operose

don't know about the newer cars, but I have seen some that the size depends on the manufacturer... that's if you're installing different axles. I've reused old nuts so they were still 32, because the new ones were a different size

what they said minus the ea82 part trunk lid for xt would be cool too

+1 for CF 87.5 xt turbo hood!!!

never worked on a soob newer than '95, but once you've removed the fans and drained the coolant, you should be able to disconnect the upper and lower coolant hoses, unbolt the radiator, and remove it

friggin sweet man!!! watch out 4 legged creatures, andy is coming

seems like there's always an ea82 for sale in CO

hey buddy, it already has an H6

passenger side window on my legacy doesn't go all the way up unless the door is open... it hits on the weather stripping... and then leaks when it rains. I need to take off the door panel and adjust it out a bit

agreed, I got kinda bored and didn't watch the whole thing :/ props for putting videos on the internet though... honestly, I've got some videos of me this winter that are really boring to watch, but it was exciting while I was driving... oh well

I'll do my best to not show up in a corolla! but PA has me on their blacklist, maybe they will turn me around at the border??

damn.. you guys will have me beat.. I'll either have the "stock" legacy with high performace rust weight reduction, the xt6 on street tires or the wagon's snow tires, or my girlfriend's toyota corolla

never used them, but now I will

nice. I can't wait to play in the snow again

check with subyluvr2212 or subie gal?? they might be able to find one

I'd have to agree that replacing axles is something you are going to want to get used to if you drive an old subaru. doing it yourself will save you lots

+1 for er27

stock obw will go all sortsa crazy places but you might have to beat it to go to the craziest.. if I'm bringing the xt6 I won't be doing anything nuts, that's fo' sho

as soon as I get some beaureacratic *************** straightened out with regards to title, the legacy will be coming off the road, and the xt6 will take it's place. this is both for me to drive the xt6 and to "freshen" up the lego it's got 17" rims on it right now, but I could swap the wagon's wheels/tires onto it for wheeling purposes, but I guess this means I really need to figure out the skidplate eh?

woah~! good to see you're at least still alive

TTIWOP!!!

not sure if the hatches have these.. but there should be a jacking plate in the front kinda in the center of the car

my 1970 mustang started after 15 years with just some starter fluid in the carb, some fresh gas, and a jumpstart.... but who knows

I believe he posted that here in the offroading forum as well

on the tires.... see if they will hold air. if not, do you have spares (assuming that you do not, based on your post..) try fix-a-flat or "SLIME" and then see if they will hold air. moving a car with flat tires by hand sucks will the car start, run, drive? if it will drive, it might drive onto the trailer fine, but it's definitely bad for the rims if the tires are flat

maybe check the MWE axle post in the vendor section?