redlipstick

cant pm you so heres my email square68@msn.com

Thanks for the info, I'll try it out when I get off. I'm assuming FPR is the fuel pressure regulator, I'm not to sure which one to tie into but I'm sure it'll be in the repair manual. Thanks again

the large hose goes to the pipe with the 90* bend the valve cover breathers are teed into the straight pipe. you can pick up a vacuum signal for the BPV by teeing into the FPR hose. the brass tee on the BPV hose is for the Idle AAV.

here is a photo of the completed setup if that helps at all.

I just got that intercooler set up you built from ( jboymechanic ), and i had a few questions. What hose hooks to the black (valve ?) between intake and air box? and did you " T " the driverside valve cover line into the passenger side then to the intake? any answers would be great

Jeff, the shipping cost for the inter cooler turned out to be only about $25 so I'm sending you a $25 refund as the price was $100 plus shipping. I used the post office and shipped yesterday, you should see your parts in about 7 to 10 business days.

Your payment through paypal just cleared today, I will be stopping at the post office on the way home from work to ship.

I can't send you a private message, so this is the best I can do. The total cost with shipping will be $150. If you are in, just send paypal email address jboymechanic@yahoo.com and I will ship it out immediately.

wondering if you got a chance to get a pic of the turbo. still very interested and mine needs to be replaced asap

sounds good on the turbo, is it the whole turbo( exhaust housing and lines) maybe you could email me a pic or two.

square68@msn.com

also dose paypal work for you?

Hello , looks cold where that picture was taken , i live in florida - but came from upstate ny