-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Posts posted by Soobinator
-
-
Ya i did that and they were different. I actually went back up to napa and had them pull out ALL their subaru CV axles and the subaru bearings that they stock did not fit a single axle. So i guess the question is, where can i get some bearings that will actually work?
-
I got new bearings and a CV axle for my 91 Loyale because i blew up the old ones. I pressed the bearings in, then go to slide the CV axle in, and it stops on the bearing. I took the CV back out and returned it, getting a different brand that has worked everytime in the past. This one didnt fit either, but both axles that I had tried fit with the old bearing. What is going on?
-
You have seen my rig, but ill try to get pics to you tonite.
91 Loyale
4" body lift
d/r T-case
3.9 LSD diff
SJR bumpers
dual batterys
EJ 22
27" SSR/Peugot (they should look familiar)
dual electric fans
Cobra CB 6' whip
utility rack
offroad lights front and rear
-
Peace portal rd. near grandview, under the power line towers. Likely PSE owned, but it's used by bike riders and off roaders all the time. Don't know if we'll do a full-blown meet there or not, but I'll prob go within a month or so.
ok thats what i thought. seems like a decent place.
-
That's too bad, I was hoping it was no worse than my issues. Maybe it can be done by next month for Custer? Have a good time...eagerly awaiting pics!
Where do you guys go wheelin in Custer? I will go wheelin there because its alot closer to me.
-
sorry guys, probably not going to be able to make it. wasnt able to get tires in time.
-
Is your car Kennys old car?
Jeff
Haha, ya it is.
-
RIght on you're right up town, You'll be able to go anywhere........ Welded rear Diff?
Jeff
No, but soon hopefully.
-
Are you lifted? There is very little chance you will make it stock, you could but it would be bad.............
Jeff
Ya i am lifted. I actually have a fairly built up subaru
91 Loyale
4" lift
BFG All-terrains
EJ 22
HI/Lo T-case w/5spd
tube bumbers
and does anyone have a CB to talk while on the trail?
-
Hey I am new to the whole Subaru thing but I'm really intersested in coming out and wheelin with you guys and seeing what walker valley has to offer.
Having some bearing problems
in Old Gen.: 80's GL/DL/XT/Loyales...
Posted
They werent that close to fitting, the closest bearing was .002 smaller than my original, and another one we tried was .003 off. So moral of the story here is, dont get anything at napa. I'm trying to avoid the dealer if I can, I guess Ill ask around at O'reillys/AutoZone/whatev.