Dwayne Oxford

It'd be BIG helpful if forums had a bad brands and sellers thread.

China made?? Our prob is criminal coddling law by lawyers for lawyers and women, which precludes proper punishments. Thus, we suffer.

Anywhere to read about the relay fumes?

Fuse'd be good start. Try all other electrics to see if anything else wonky.

Must I remove piston to replace it? Caliper is fine but boot is torn. Not finding any videos for these.

Thanx, will do. I'm in TN, will try to get that onto profile.

Induction heater may help.

Anybody know source?

THANX!! What I needed!

Called Nashville, TN (Downtown)Subaru, got a helpful parts man, reasonably sure 812764110 is the PN. Found couple sources; https://www.amayama.com/en/part/subaru/812764110 https://www.subarupartsdeal.com/parts/subaru-seal-washer-rocker-cover~812764110.html?vin=&make=Subaru&model=GL Series&year=1985&submodel=&extra1=&extra2=&filter=() Anybody know for sure??

Good show!!

Need PN and best place to buy. Old stuff getting scarce. Seeing plenty for newer engines. Are they same thing?

Anybody able to download their PDF catalogs? It keeps bringing me back around to ID form. Found this kit I think will fit my '83 GL wagon. https://www.ebay.com/itm/FRENKIT-Repair-Kit-brake-master-cylinder-120060/154201928962?hash=item23e726b502:g:7YYAAOSwQWFZdQov#vi-ilComp

Had similar with my '83, was loose distributor shaft.

For future reference; 723237000 or 28487A https://www.subarupartsdeal.com/parts/subaru-lock-washer~723237000.html Is there any way to get emails of posts here?

For '83 GL, they appear to've been largely discontinued at/by parts houses here. Can?? get Raybestos MK1609 - Raybestos Element3 Brake Master Cylinder Repair Kits rebuild kit from Summit for $53.76. Anybody know cheaper option?

Will the black work to replace the blue?

Can prob fix you up with glovebox lock, got eight 80-84s.

Welcome NDL. The one on my '83 4WD GL wagon is black and has 6 wires. Wish I knew why it turned 2nd shot sideways.

This is the FPCU on my '83 GL Wagon. Bottom row; BU/RD, hot when cranking. BK hot w/ign. on. Top row; BK, GRND w/ign. on., YEL, ign. pulse from coil/ dist. module. Quit pumping gas twice yesterday. Installing temporary jumpers to attempt "in flight" diagnosis when it quits again.

Thanx y'all! Didn't realize how much the bushings were worn. Had .015" slop at top. Got blessed to find a Cardone rebuild on Ebay for $120. https://www.ebay.com/itm/REMAN-OEM-DISTRIBUTOR-42987-8110-DR480-03-FITS-SUBARU-DL-GL-BRAT-31-810/274358924769?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Superoo's back out on big road.

Fixed mine, thanx to folks on new thread, Didn't realize how much the bushings were worn. Had .015" slop at top. Got blessed to find a Cardone rebuild on Ebay for $120. https://www.ebay.com/itm/REMAN-OEM-DISTRIBUTOR-42987-8110-DR480-03-FITS-SUBARU-DL-GL-BRAT-31-810/274358924769?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Superoo's back out on big road.

I'll call them tomorrow. Hoping they'll just rebush one of mine.

https://www.rockauto.com/en/catalog/subaru,1982,gl,1.8l+h4,1268298,ignition,distributor,7108