Bucky92

The Yellow is done..its just baking on in the sun right now..will wash tomorrow and them clear coat...best word to describe....Remeber the old 80s Christian Rock band Stryper??? OK...cant contain myself: What was I thinking!!!

I ran out of yellow yesterday so I have to get more today..but ...tease tease tease.... Wondering..........

Run it with the rad cap off and look for bubbles..if its bubbling you are right to assume head gasket. I know the EA82Ts are very prone to head gasket issues.. I am sure someone who owns one will chime in on exactly where its leaking from..but I know the bubbles in the rad are a definate ( the crack would be in the exhaust ...meaning exhaust getting into coolant evaporating it).

I think that since we now all know that this is BGD..a banned member..then we should let the mods deside what to do from this point on. But thats just my opinion:)

I been setting money aside for this...well kinda..but I dont care what the price of gas..its the least of my worrys....and right now Rock is down between 13-15 mpg with the bad bearing...2 weeks to finish this paint job!

BGD liked to give some really off the wall advise...for example...insisted that the reason my XT6 alt went bad was because I added new sheet metal when I had a hole in the floor repaired..so the car wasnt grounded right anymore.( the true reason was a combo bad plug/loose belt/a ton and a half of belt dressing shorted it out). I know he pissed me off many times and alot of others. I wont get into his theory that ONLY EA82s are balanced motors and the greatest creation of all time..his whole 3 main bearing worship thing

I just love that car Phil... I started shooting the yellow today....just on the rear part of the trunk lid ...its going to be hard to tell how it will turn out till its actually finiahed and I can pull all the tape off...keep your fingers crossed. I need some of those pig stickers too..But I just got some awesome McBrat decals today

That is what was causing some of my XT6s stalling problem...the little yellow " Hey dummy you need to put some gas in me" light doesnt work anymore and every time I run it that low it will stall.

OH!!! and I am planning on bringing some of my broccolli salad stuff..those who have been to one of my cookouts should remember the stuff with onions,bacon,raisins and broccolli...yummy...and it keeps well too...also bringing at least one cooler...let me know if you want me to bring 2

If you guys want I can pick up one of those cheapy charcoal grill/Hibachi thingys and some charcoal...let me know and I will get one this weekend or next.

I know my XT6 is definately scratch and dent...rust and patch...covered with brand new rattle can paint...Not going to win any awards thats for sure.

Paul..lets see where I am with painting my car ...Sunday maybe Tommy and me can bring the truck down and give you a hand for awhile.

I am doing it in the garge cause of wind and bugs..but last night right after shooting the hood I found a nice long hair stuck to it grrrr...its ok thought..the pics make it look good ...I just cant wait till its done..I just hope the vision in my head looks as good in the real

+1 for what dearon said...since I just went threw the same thing with my XT6..this is what I have done to cool it off..removed the thermostat..( cooled it right off cept in long idle it would still start to heat up...flushed the cooling system...removed the radiator and checked the fins and cleaned out any garbage that desided to live between them...my thermosensor for my one fan is bad so I just jumped my fan switch to run all the time when thecar is running....nice and cool now...no heat but its finally warm out...waiting for an OEM thermostat right now and will get a new thermosensor soon

HAHA actually he gave me the idea...but I am putting a twist to the cheese wedge..I am going to have black stripes on the sides. Cant copy the cheese wedge completely you know.....but he should be honored that someone wants to modle thiers after his;)

Have to share another teaser..please excuse me for all this but I need the encouragement cause I have never tried to repaint an entire car...let alone go alittle fancy and 2 tone...I plan on adding a second coat tomorrow and after finishing the yellow...do you think I should throw on a couple layers of clear coat to protect the paint...since rattle can wont harden like true auto paint?

18 MORE DAYS!!!! Bumpity Bump Bump...Hope everyone is getting excited...Rocky just got his first complete coat of black paint.. :banana:

I am trying I am trying..Talked to Dave yesterday and if we can't get them swapped before I am probably going to risk it anyway to drive him down and maybe try and swap them out there. Like I said before I actually love doing body and paint..just wish I could afford the right tools to be more professional...like a spray gun and a paint booth

14 hours of prep work yesterday....this project has allowed me to put Bucky back into action:banana: ( I love my wagon ) cause this is probably going to take the next 2 weeks to complete...even though Rock is being rattle canned for now it just a TON of prep to doo the two toning..plus I am going to have to use some pinstriping to cover where the 2 colors meet. Mick designed the coolest "Under Construction" decal for him too:grin:

Naaa.he like his pick-em-up truck:grin:

Here are your teasers. Nothin Funnier then a fat chick working on her car:rolleyes: Look I got Tommy Helping!!! Thats all ya get!!

LMAO..he is a computer genious..but a carpenter by trade...an he has a Mullet....I will be posting a pic later ..some teasers for you guys

Now this is the exhaust from my XT6 ..but you will get the idea for an easy fix.: Dont mind my fiances feet..fe is taking the pin striping off so we can paint the car

Yup that can be fixed..take off the heat shield and have someone cut and weld a small piece of straight pipe in..Give me 5 minutes and I will take a pic of the patch on my XT6...but thats the same place my Loyale broke.

Well the exhaust thats on my 92 Loyale is actually off of on 86 carbed wagon ( we pinched the "trumbone" shut and folded it over...car still passes emmissions with flying colors)...it has the dual cats...and the reason I stated resinator pipe cause in the parts books ..thats what it is listed as...and if you just ask for the Cat( Y pipe) its like $400 but the res is $160. I do believe all EA82s have the duals..my ER27 also runs the duals. I can't remember if my EA81 had duals or not. My ER27 has a patch I can try and get a pic and maybe it will help you figure out a cheap way to fix it ( Mines was right where the flange was also.