[flywheel inspection plate won't fit? EA82]

Hi all. Put the flywheel from my RX (had it turned ahead of time) on the SPFI motor I'm putting in Skeet's car.

The inspection plate on the bottom doesn't seem to want to clear the flywheel now (properly installed, pilot bearinged, and torqued to spec) as when i try to rebolt the plate it wants to rub. anyone know what's up here?

thanks

[considering the XT6 5-bolt swap...]

yeah, $20 is correct. no worries, i forgot about them too

[considering the XT6 5-bolt swap...]

thanks Corky. so should i grab the XT6 front axles as extras for my car? and will any subaru 5 bolt wheel work on this bolt pattern?

thanks

do you still want the black lugs I have? I found them under a pile of crap on my coffee table :moon:

[Why the $*%*$*#$ is my front 5-lug swap being such a pain in the ass????]

sorry to hear about that, andrew. call spaldings in spokane at 509 924 3300; they should probably have some.. if they don't ship, i can

[Hatch spare tire carrier thingy....]

part of the reason for one of these is to make it more convenient to carry two spares, for instance. no reason they both couldnt' be on a swinger.

[considering the XT6 5-bolt swap...]

Hi Tex.. thank you. Spaldings has some XT6es that you could probably get stuff from.. those cost more than this might for me though

thanks!

[Spokane mechanic]

hi.. i unfortunately wouldn't know where best to send you for this.. I would recommend the Appleway dealership group over Camp (both sell/service subarus too) as it seems to be friendlier and better run; parts ordered come in faster, also, camp chevrolet don't tip when they order pizza from us

but none of that is more than my gut feeling. good luck though!

[considering the XT6 5-bolt swap...]

I just found an XT6 that I may have free access to. I'm considering just taking the parts for the swap, and want to make sure i've got the list right:

rear:

calipers, rotors, backing plates, brake lines, just like a drum to disc swap, right? don't need the rear shocks if i like mine already?

front: (impreza) struts, knuckles, rotor, caliper, brake lines.. don't need the lower control arm or anything?

obviously i'll want the rims/tires too.. too bad they're ugly

are the axles the same as my turbowagon? (grab for extras)

 

I hope the seats are nice

[REMOTE CONTROL toyota Camry.. movie DL won't last long!]

this is worth putting in the wrong forum here because it'll disappear soon

http://home.comcast.net/~broncojim/rccar.wmv

we need a remote control subaru

[rear sway bar VS 4wd bump stops]

thanks

[rear sway bar VS 4wd bump stops]

top

[Secret Mobile]

some GLs came with them too.

[RX sway bar ??]

have i asked for your address yet so i can package it up?

[rear sway bar VS 4wd bump stops]

Hi all..

I'm switching the rear control arms in Skeet's wagon over to the kind that accept a sway bar.. but those control arms don't have the 4wd bump stops. My plan is to hacksaw off the bump stops from the old control arms and send them with Skeet to be welded on later, unless..

do the bump stops and the sway bar interfere with each other in any way? I can't think of any way they would but I've never actually added the bump stops to a sway bar car before.

thanks

[A couple of little goodies...]

that's pretty cool actually. this board is a little slow at night

[will be driving from east coast to midwest at end of week]

eww. i don't like screens, but i especially wouldn't use skeet's truck stop screens. what do you need all of those for anyway?

[details wanted: hitachi carb secondary mod?]

:temper:

[details wanted: hitachi carb secondary mod?]

ahem. thanks, skeet. why don't you just go ahead and be all smug about it? :moon:

 

if anyone ELSE wants the link:

http://www.subaru4wd.net/New/mods/carb.html

[details wanted: hitachi carb secondary mod?]

i think skeet's car has a hicrappy on it. anyone got the link for the hitachi carb mod page please?