kingwill
-
Posts
175 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Posts posted by kingwill
-
-
Not sure if this will help you but I have been thinking of doing this mod
http://forums.24hoursoflemons.com/viewtopic.php?id=30037
Google search Webber BBQ fender flares
-
thank you so much
-
EA 71 I believe.
1980 Brat GL
-
I bought a webber a few years ago for my Brat. But I never got an install kit for it. Now Im looking to finish the mod. What webber install kit to I get. There are so many kinds I don't want to waste my money on the wrong one.
(32/36 electric choke)
Thanks for the help
-
ok the windshield cost me im thinking 30 bucks and I think the gasket was also 30. so 60 bucks for both
-
ok no problem its just sitting in my storage unit it will give me some time to find the new gasket too. Just let me know when you r ready. I live fairly close
-
hmm well my carb is fine in mine but I was thinking of the upgrade to the webber I have one as well but not sure where to get an adapter for it either, Would Subaru still carry these parts or some after market place. I just dont know
-
Do you still need a windshield? I have one in storage and a new windshield gasket for it too, I have to find that though.
I am amazed with the rust and the restoration you have done with your brat good job it is looking good.
-
I found a 79 brat in a yard in Eugene a few yrs ago, that had dual pipes, and the dual intake which of course I snagged. I have not had the time to install them. But the y pipe was cut out its straight pipe from each head to the rear of truck, there are a few supports that bolt up along the journey of the pipe.
I thought it would be cool to run the dual exhaust, with the dual intake, and dual webbers. But I ran out of time and money, And it just may be over kill for the little 1600cc that is in there.
-
Put me down for one too, I've been looking for someone to make a good lift for the gen 1's
yours look fantastic.
Im in no hurry though. Let me know when you are ready.
-
These guys may be able to ship one to you.
Glenn Mitchell
Riverside Auto Salvage
36139 Riverside Dr.
Albany, Or. 97321
541-967-3904
1-800-762-8482
Glenn is the owner, very nice. He has two 79' Brat's in his yard
I took some parts off last week, the front ends are nice.
Hope that helps
Brad:)
-
Other good parts are front fenders, windshield, If you have a A-bar or roll bar or some other parts like rear seats, rear seat belts, even the the rear seat bracket. (you may need to cut that out). Tail lights and blinkers. If the trans is good. and hey the engine is good too if you have the space.
-
1980
1600
single range high
milage ????
$300 and 500 Hotwheels
Right now tranny is blown 2nd time. Waiting for replacement.
-
What happened to the pajama paint job? They didn't come through for the advertising or what?
I had to change the design so I did not get sued. A little known thing called copywrite infringment.
Oh by the way I added more pics of what it looks like now..... Or before the color fadded and the paint ran in some areas.
And the problem with adding more and more paint is that it cracks a lot and just looks bad.
I wanted to paint it a solid neon green and get magnetic graphics placed on the car that I can remove and change around when needed.
-
I have gone to macco to get an est. on painting my brat. They quoted me 1350.00 :-\ (Right now it has been painted with spray paint) Spray paint fades in the direct sunlight and smudges with the rain at times even with clear coat.
Does anyone know where I can go that may be a little cheaper, but still get a good paint job and real clear coat?
-
Did you take out the cyclops light? Or are you just missing that part?
Good looking wagon all the same. What did the new exhaust run ya?
-
77'-80' brat 1600 engine single range trans.
81' brat 1800 engine dual range trans.
82'-87' different body style (The ugly ones)
Just kidding
-
I have a set of the 15's alloy. The tires are shot, I was quoted at a tire shop American Discount Tire) $1200
for the tires alone. (wtf?) I really like the alloys but can't afford the tires.
Any suggestions?
-
I asked Richie live, he stated that the electric would be the best.
-
I am upgrading my 80' brat and soon my 80' wagon to a webber carb. I really do not know much about the carb itself.
Which one should I be in the market for. that will give me the best performance.
32/36 DGV A5 (manual)
32/36 DGEV (electric)
32/36 DGAV (water)
32/36 DFEV (electric/reverse)
-
What is the cost of the lift estimated?
I may be one of the 4.
-
I also would be interested in a lift, I'm tired of being the short one in the group:banana:
-
There's carpet in the bed? That's strange. anyway are you looking to make it a classic, all the original parts and stuff? Or are you going to fix it and use it as a dailly driver, or just for goofing around with it.
Also How rare are these brat's in your area. If you wait for the next best thing, how long will you have to wait? I know over here (west coast) they pop up every few months.
$300 bucks is not much to pay even if the car is peiced together it still a brat? you can always find more parts at a later date. not to offten can you find the car/truck (brat)
Pics would be very helpful, to see what ammount of rust the owner is talking about.
There are always ways to fix or repair rust unless it is a pile of rust dust on the ground.
Are you needing to tow this or can you drive it back the 8 hrs trip?
-
update I did go to the auction but did not win. I only had 150.00 max to go on and it sold for 200.00:mad:
It did not go to a suby fan it went to some young guy that wanted to thrash on it more. The wagon was extremely rusty and the interior was trashed. The pugs had oversized tires with really good tread. If only I was working and had more doe
1979 brat fender flares?
in Historic Subaru Forum: 50's thru 70's
Posted · Edited by kingwill
I think it will look good