mcbrat

nice. just like the 85 RX sedan I got my seats out of. I snagged the LSD out of mine, and the rubber intake tube. I went back to get some more stuff and they crushed it with the tranny....

ran them all, but if you need to send me at email at thebratguy@hotmail.com so I can forward them to you. (If you didn't provide email....)

Chef Tim has one set-up that way too....

good until May 8.... approx.

I have 4 30x9.50x15 tires, but they don't match. 2 are decent Cooper Discover Radials with 11/32 tread left (new they are 15/32nd I think) the other 2 are nearly bald, and some other brand....

just remember to get one with the same ratio

these are 25.5" (205/65R15) the 205/70R14's are 25.3". no or cutting involved.

205/70R14's should work fine, but you'll still have to beat down the seam at the back of the front wheel well (after removing the plastic to do it) then put plastic back. and you might have to remove the frotn mudflaps. I did, but mine were aftermarket ones, that may have been made differently that stcok ones.... you'll need to beat the inner strut tower area anyway, so may as well do the seam while you're at it...

Archemitis and I are doing a trade, and I have some parts going to Tim. anythin in particular you are looking for? I have a reinforced ea82 rear diff hanger (painted yellow), some centerlamps (incomplete)....

see my post on this thread: http://www.ultimatesubaru.org/forum/showthread.php?t=14387&highlight=wood

I've got a 3" lift on my 86 Brat, and I've got 25.5" (205/65R15) diameter tires on now. I had to fold over the seam at the rear of the front wheel wels, and remove my front mudflaps.

195/65R15 is about the biggest you can go on a stock hatch with the suspension raised up......

well, a ea82 Y pipe will fit on an EA81, so it should be possible........

Tim, which vehicle? I'm thinking of giving a seminar at the midwest meet on all the things electrical I've learned along the way I'll have a aftermarket pump on, as well as some other goodies

I think stopping in Onawa is a good idea. there might be other "small town" shoppes that interest people......

I will be arriving Saturday morning as well from Central Iowa. same route as Shawn.

good idea Adam... never thought about the coil wire. I was at the left front corner, so it was all right there... I did pull the battery cables off (even though I know you're not supposed to... I have quick disconnects on the batt cables) obviously my alt is working well

you'll have to splice them together. the shifter in P is what connects the 2 together, i believe it the set of most forward wires. black with yellow strip maybe. larger guage. when I was messing with mine, I forgot I had been messing with the shifter, and I left it in D, and used the starter under the hood. oops... I held the brat back as long as I could, and it just crunched into the stuff ahead of it when I made the dash to get in and stop it

I'm confirmed. campsite #4

Mountain Grizzly was my old '82 wagon. the decals were actually an aftermarket set made for a Hatchback.... got 'em off eBay for like $15.00

the model: http://usmb.net/gallery/album93/PDC_0331 there's been discussion on snorkels, but not the safari type (hood scoop on the roof I assume)

when it does that, you have to hit refresh on your browser. the photos software does that sometimes.....

I had the same thing happen on 2 different vehicles, and it was the axle each time......

http://usmb.net/gallery/crayon-art/mtngrizzly http://usmb.net/gallery/crayon-art/subarubrat

mine would be just for Sat. night