mcbrat

yes.

I've seen 2 different types of bearing in ea81 strut mounts. one is a layer of fine needle bearings grouped in a circle, and the other is just a pair of thrust bearings, which should be replaceable with a set from any hardware store....

nice. I like the dark blue...

put +12V to your motor to make sure it work with direct power... I had one go bad, and it was actually a crack in the motor housing that made the worm drive inoperable...

mostly used as my tow rig, and general work truck... '72 3/4 Ton with 4" lift.

I have the actual paint chip pages that the paint stores had in their binders... always been meaning to scan them and add to the page.... that gray according to my chips, was '84 only. I've only seen it on coupes too...

1984 - code 394, Misty Gray Metallic Du Pont code N8326

do you have a return spring hooked up, or the hill holder to provide the return spring?

the coolant temp switch is what I sent you. do you mean the temp sender in the intake manifold?

the custom exhaust shop I always go to always seems to have them on hand to fit....

it's too rusty underneath, plus I have a bunch of work I want to do to my firebird, plus other house things need attention. the only reason I even looked at this was because I was looking for a spare ea81... but for the price, I couldn't pass on it, just to get the doors and fenders.... I've got a feeling the larger parts will be staying with some locals....

Yes. The clear dome lense is there and the vinyl floor mats too. The drivers side door and mirror came from a black turbo though it was painted white long ago.

not yet.

there's the answer I needed....

Picked this up this past weekend... spare doors and fenders for my Brat round headlight set-up for my Brat tires are almost full tread Douglas Xtra-trac (sp) notched alloys (missing 1 center cap) has a freeze plug popped on the passenger side head...

this is the exact one I got. http://www.ebay.com/itm/MOMO-Steering-Wheel-Hub-Adapter-Kit-Subaru-Part-7301-/190582972124?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ASubaru&hash=item2c5fa15edc&vxp=mtr the 7301 is supposed to be for the early ones, but it worked fine on mine. it's taller than the 7302 by a little. not sure how much, but in a Brat it doesn't matter much... in a wagon, it could conceivably make it tighter...

Momo 7301 adapter http://www.ebay.com/itm/MOMO-Steering-Wheel-Hub-Adapter-Kit-Subaru-Part-7301-/190582972124?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ASubaru&hash=item2c5fa15edc&vxp=mtr http://www.ebay.com/itm/Steering-Wheel-Hub-Adapter-Kit-for-MOMO-NRG-Sparco-Subaru-Made-in-Italy-/190737945464?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ASubaru&hash=item2c68de1378&vxp=mtr both are from Crowder Customs, which is where I got my adapter from 2 months ago... (my dusty pic above)

6 gole mount. what's the diameter. 6 hole is also Momo

here's the one I had in my skiwagon...

I always wanted to do the round headlight conversion on my Brat, but never assembled all of the parts and sold off what I had... I was also concerned about replacement turn signals/bezels too as they are harder to find than the stock '82 style which I have lots of spares... now I have the opportunity to do the conversion again (picked up a mostly running '86 STD Hatch, HG failure on EA71) convert or sell..... that is the question.... post up your pics of your conversions to help me decide

a word of caustion using those relays... they are not particularly suited for lots of vibration or hot/wet environments....

http://www.indysworld.com/subaru/red-brat-round-hole-pugs-1.jpg http://www.indysworld.com/ci4wi/2012/dust.jpg http://www.ultimatesubaru.org/forum/showthread.php?t=125742&highlight=momo I'll have to upload another I have of a momo one I had in my ski-wagon

"Scott in Bellingham" on the board http://www.ultimatesubaru.org/forum/showthread.php?t=136472 http://www.sjrlift.com/

sounds like a bee attack....