its_masters
-
Posts
57 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Everything posted by its_masters
-
Yessir. That is actually how i learned to do it. But i figured seeing how i was there, I might as well do the steering wheel too. -
Here is a video I did after I figured out how to do all of this. Enjoy! Hope it helped!
-
Thanks! Both are wagons, so this is good news. Hahah
-
I did the separator plate. That leak is gone, but now my front main seal is leaking. And my transmission went down the toilet, so now I'll be using as a semi-parts car for the 98 Outback I'll be getting soon.
-
I was wondering if I can swap the interior from a 1998 Legacy Brighton into a 1998 Legacy Outback? The Brighton is a parts car and I want to swap the seats and maybe other interior pieces because the interior in the Outback is 1) Leather, 2) Ripped. Either way, I cannot stand leather and want to do the swaps. Will the brackets and seats fit right in? Thanks in advance!
-
Thanks everyone! I'll be pulling the engine and tranny soon enough, but work is already started so I won't be able to take it to a car wash... I can take care of the cleaning once it is out. I plan on doing the rear separator plate, the o ring, the timing belt cover (It already has a bad gasket, but doesn't seem to leak), and a few more seals. I have some stop leak ready for when we are finished or if we end up just pulling the transmission, then it'll work for now. I want to pull everything though... It just depends on the work time I get in. The valve covers seem to be fine, they actually have no oil one or near them. But i will check everything out if/when we pull it. Thanks again!
-
I bought a 1998 Subaru Legacy Brighton a few weeks ago needing "a clutch and an oil change." While it does need both, there is also an oil leak i cannot trace. My entire underside was oil on it, but the drip is dripping off of the oil pan, where most of the oil is coated on. I think it's either the plug/plug seal, the gasket, or the oil pan itself. If i replace that, i would do all of those, but i wanted to know if there are any other possibilites for issues before i invest in that. Here's the leak at the oil pan:
