Scott in Bellingham

no 2" EA81 $350 not complete? theres alot of small stuff like shocks on a EA81, shifter linkage issues some people like to get longer brakelines, Radiater hose mod, steering extension that kind of stuff,

just a reminder you need a Discovery pass now

so no 4x4 tranny? and why?

I got a tank if you need one

I would link the lift blocks together , weld bars between , which will cause less stress on captive nuts, in this picture looks like bottom of bolt has no support , this will also cause more stress , would like to see pictures of lift blocks Scott from SJRLIFT

my kits are 1" over stock so a 4" lift has 3" engine crossmember block , except on the EA81 a 4" lift is 4" all around I like your ideas will be watching progress and Interested what works in the real world

I sell them at my store www.sjrlift.com

it can be done, I could do it for you, the EJ front a-arms are different then the EA stuff but with a 4" lift that gives you plenty of room to make it work, also the EJ struts sit out further but that would be corrected with custon EA81 tops and EJ bottoms on the strut towers, I have both the EA81 and EJ car front chunks so I could jig up the parts and ship them to ya, if you came up for a weekend and helped it would reduce the cost

OK I can adapt the EA82 throutle boby on , can I get spark without a disty?

I want to put a EJ22 into a 87 EA82 SPFI car but I want to use the EA82 wiring , whats involved ? maybe use the EA82 SPFI and I guess I would need to set up the EA82 distributer, Im trying to get away from rewiring the car to make this run, I dont mind if its a little down grade from the stock EJ setup , its for my red wheeler sedan , I could run the disty off the front of the cam pully maybe, I could adapt the Fuel Injecter to fit the EJ manifold, has anyone done it?

finally moves under own power things left to do to make usable hook up rear brakes rear shocks exhast more to come rear sheetmetel work rear trunk lid tidy up interior external rollcage winch front and rear air cylinders on rear axle to control movement later yet add toyota front axle and a set of NEW tires

4" at the struts 3" everything else , steering will be less as its at a angle , struts are the key rest is right angles

the first go around was a learner, I like how this is going together, goal is Walker this saturday , been to long since Ive been out

got the new axle all mounted up redesigned the setup so the front pivot point is up high, center of car nothing is lower then 2" from stock body , will eventually install a center body skid panel

any updates? I like your car

got my axles Toyotas 5.29 gears, lockright in the rear , ARB air locker up front, front axle will wait a while, I realy need to get this this back on the trail, this time around it will be driven not trailered to the trail, got the front diff redone its a 4.44 with old style diff stub carrier old setup out will keep the same rear spring and pivot

I sell used parts

good job Jeff whats the first outing?

I run 31s with a ej2.2 Measure out about 30 works great, wouldnt recomend it with the stock 1.8

so Im ready to tackle this , so basically take the carrier from a 3.9 stub style diff and swap it into the 4.44 diff? with no changes to anything or special parts?

A welcomed one at that :banana: see ya on the trail:eek: