Roobaflu

I thought maybe he was late because his car was like mine SLOOOOOOOOOOOOOW I do get a lot of people looking at the wombat (lime green 85 hatch with 3 inch lift, still on 13s), but they are usually laughing or saying "that is so stupid", I like the occasional look of utter confusion when people have NO idea what it is

and what is a duty solenoid???

its coming from the light on the ecu itself I was running without the ecu but without the ecu I can't get the idle below 1800 rpm :\

ignition pulse system? whats that?

maybe I'm reading it wrong... one long flash, then 4 short flashes

whats a code 14 on the ECU on an 85 ea81 with a hitachi carb?

whoa tom, why are you going into the hospital?!?!?!

that didnt fix it :\ I thought for sure that would have done it. But I started the car after it had been sitting overnight, and the gauge was reading halfway at startup, that CANT be right, lol

I pulled the Tstat out just to check, and it still did the same thing, maybe the radiator was so cool because it was 35 degrees out

I tried but I can't get the shade of green quite right. sorry :[

ok, on my 85 carbed engine, there is a computer module under the steering column, EXACTLY what does this control.... my car started cutting out tonight, sputtering, stumbling, whatever you want to call it, while I was going down the road. If I unplug the puter, it runs fine, with the puter it cuts out. ????????????

tonight on the way home my temp guage went all the way up. 35 degrees outside, cruising along out in the country. I pulled over, shut it down, popped the hood, the radiator itself was cool, the hoses were warm but not really hot, the engine was hot but not really hot, I could put my hand on the valve covers without burning myself. I grabbed a bunch of rags and opened the radiator cap (I know bad idea) and it hissed about like when you open a soda can, that was it. the radiator was full. I started the car back up, the temp guage was halfway, sat for a minute, temp guage didnt move, as soon as I pulled out, the guage went all the way back up. I really dont think I overheated it, but I'm not sure. does it sound more like the guage? or the sender?

its an absolutely gorgeous color, he posted a link for it

if you use a heat gun to GENTLY heat the edge of the fender it will somewhat soften the paint and decrease the likelyhood of paint damage. Just dont get it too hot or you're going to blister the paint off obviously

did the DL's have ea71s and the GL's have ea81s or was that just on the hatch?