-
Posts
46 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Everything posted by metalfanmartin
-
Hey everybody, I've got a 1990 L series Subaru. I've tried searching but I just can't find what I'm looking for. I'm having troubles with my speedo, generally it doesn't move unless i tap (just once, gently) on the dash screen. Sometimes it works itself, but most of the time it needs a little tap when taking off. Every time I stop, I need to re-tap when taking off. I recall coming across someone saying you have to pull the dash apart and resolder something, but I simply cannot find the diagram/picture. I've already pulled the dash off and re-attached the speedo plug which didn't make a difference. (and in addition to this, there is like hardly any play with the cable, it is very short?? If you know what I mean? It's hard to re-attach). If someone could point me to the picture/thread which shows which solder points to look at, that'd be great Cheers!
-
Hey everybody, I've tried searching but I just can't find what I'm looking for. I'm having troubles with my speedo, generally it doesn't move unless i tap (ever so gently) on the dash screen. Sometimes it works itself, but most of the time it needs a little tap when taking off. Every time I stop, I need to re-tap when taking off. I recall coming across someone saying you have to pull the dash apart and resolder something, but I simply cannot find the diagram/picture. I've already pulled the dash off and re-attached the speedo plug which didn't make a difference. (and in addition to this, there is like hardly any play with the cable, it is very short?? If you know what I mean? It's hard to re-attach). If someone could point me to the picture/thread which shows which solder points to look at, that'd be great
-
Well I figured it out, it appeared to be the vacuum hose for the aircon! The T piece had snapped off and the hose was flapping away freely. Great, I thought! Cos my aircon wasn't working properly and I thought this was the fix. Wrong, it still doesn't work. It blows cold air but only blows at the feet? Doesn't change when I select face or windshield etc. Interestingly, I needed to get behind the dashboard as my speedo wasn't working properly either (doesn't show speed travelling unless I tap the dash cluster a bit). Upon looking at the vacuum hoses, there was four all hooked up correctly to the controller, but then there was also 2 hoses sitting there unconnected, no idea where they go?? Picture attached (lol sorry for so many questions!)
-
Thanks for that Bennie. Sorry to be a pest with questions, but I noticed something else that I hope someone can put my mind to ease! I noticed a small ~7mm hose that has a hole in it that is hissing. I'm not sure if it's sucking air or pushing air, I've attached a picture. Any ideas? The hole looks like it's meant to be there, but it also looks like it may have had a hose coming from there which has broken off?? Cheers, Martin
-
Hi From "Down Under"
metalfanmartin replied to Subista's topic in Meet n' Greet. Your USMB Welcome Center
G'day Alan from a fellow aussie, and welcome to the forums! There's plenty of friendly people about, I'm sure there will be someone who has an answer to whatever questions you may have. -
Thank you very much Hooneru and Dfoyl!! Put my mind at ease And thanks again Hooneru, I am actually relatively close to Wacol (I live in a place called Ipswich, west of Brisbane). I'm pondering whether to go to Autobarn to get a brand new seatbelt assembly ($130) they have in stock which *apparently* suits my Leone. Or whether to get a secondhand belt (cheaper) which obviously might not be as safe. It is for a roadworthy certification too so it probably wouldn't hurt getting a brand new one. @Dofyl Luckily it doesn't get anywhere near cold enough, often enough, to warrant the hose I think. Where I live we'd barely touch 0 degrees maybe once or twice a year. That being said, I think the engine bay might look a little neater with the hose connected, don't you think? Is there anything bad that might happen if water were to enter the exhaust hole?
-
Thanks everyone for your input :--) It's definitely the EA82 I have LoyaleTurbo2.7 as I can clearly see it marked on the engine block I am just wondering if you guys can take a look at the attached pics. There seems to be a hose missing and just an open ....hole... on the muffler assembly. Is that anything to worry about?
-
Thanks Dfoyl, I'm not actually after a repair manual I was just perusing what was available on the website I only asked the question because went into repco enquiring about a seatbelt and they said they only had 1600 & 1800 Subaru available on their screen, at their time I didn't realise that it potentially could suit my Leone. So, with that said, might it fit my Leone?? Are you an aussie Leone owner? cheers buddy!
-
Hi everybody! Glad to see some discussion on this thread I have a question again. Upon looking at what repair manuals rockauto has, I notice that under the Loyale area it says the repair manual is "1600 & 1800" (see attched imaged). Now, why I ask this is because my local parts shop has seatbelt assemblies for "1600 & 1800" but not for my Leone (Loyale). Does 1800 simply refer to the EA82 and 1600 EA81? more importantly, will the 1800 seatbelt suit my 1990 Leone/L-Series/Loyale. Cheers :--)
-
New brumby owner in Australia
metalfanmartin replied to Brownie586's topic in Meet n' Greet. Your USMB Welcome Center
G'day mate and welcome aboard! I bought my Leone from Toowoomba a few weeks ago lol -
So, this just happened...
metalfanmartin replied to wunderlich's topic in Meet n' Greet. Your USMB Welcome Center
Welcome to the boards amigo, sounds like a very frustrating day.- 1 reply
-
- dead battery
- broken hood lever
-
(and 3 more)
Tagged with:
-
1991 Loyale Wagon aka The Blue Pearl!
metalfanmartin replied to TD90_nw's topic in Meet n' Greet. Your USMB Welcome Center
Looks very straight, mate! Welcome to the club. I myself have only just joined too (mine is a L-series/Leone, which is what they're called here in Australia). Have fun! -
G'day everybody, I apologize if this question has been asked/answered before, but I couldn't really find any information. I have just bought a 1990 Subaru Leone(/L-Series) here in Australia. It is pictured here. Long story short, I am wondering if 1990 Loyale parts will fit my Leone, I'm talking timing belt kits and other bits and bobs. I see that rockauto has a fair few parts available for the Loyale. Cheers, Martin
-
New Leone owner from Australia
metalfanmartin replied to metalfanmartin's topic in Meet n' Greet. Your USMB Welcome Center
-
Hi. Woo hoo!
metalfanmartin replied to lovejunkie's topic in Meet n' Greet. Your USMB Welcome Center
Looks like a bloody nice vehicle mate, welcome to the boards! I'm new here too. :--) -
Brand new to Subaru, 97 Impreza
metalfanmartin replied to STG2's topic in Meet n' Greet. Your USMB Welcome Center
G'day and welcome aboard! -
Welcome to the forums, mate. Hopefully you'll find the info you're after. The picture you attached (or is it apart of your signature?) is tiny, you may want to add a higher resolution picture.