Tyler94w

Thanks dee2 I'll look Saturday and see if I can compare it to your manual it's 21 degrees with a wind chill of 8 degrees but its sopost to warm up by Saturday

Thanks dee2 I'll look Saturday and see if I can compare it to your manual it's 21 degrees with a wind chill of 8 degrees but its sopost to warm up by Saturday

went to the local subey dealer ship hopeing to find a vacuum digram came up empty handed then called a mechanic that works on Subarus he could not remember how the vacuum lines went. Will Mail somebody $20 if they snap a couple of pic's of a carbed ea82 vacuum lines that come out of the manifold. My truck is about to kill me at 10mpg???? plus I just miss driving the little scoob

http://rs86.pbsrc.com/albums/k98/Tyler94w/image_zpstr1hvlha.jpeg?w=480&h=480&fit=clip

http://rs86.pbsrc.com/albums/k98/Tyler94w/image_zpswjwev9s4.jpeg?w=480&h=480&fit=clip

FullSizeRender.jpg

Thanks Davet greatly appreciated what is the tsb model if you don't mind me asking. I think mine only has one t in it. If I could figure out how to post pics I would. I bought a Chilton manual but I can't tell any thing from the digram

FD415B73-88C7-4EE7-8C08-A28ECC5A4D00

Not a mechanic just barely a diy so please bare with me. so I replaced the timing belts, water pump, and valve cover seals own my ea82 and every thing went great except I took the air breather off to get the compressor off and valve covers off. Now I can't remember how the vacuum line go????. I've got all the the little one hooked up it just the 3 big ones on the driver side and the two big ones on the passenger side goes. this is a U.S model. And yes I know now that was stupid to unhook all that because it was probably unnecessary but o well I'm learning ????☺️