Brumby Boy

yeah well it may not happen now that my ute has been stolen(see post in older gen)

oh ok spose i wouldnt have trouble up in tropical nq

Na i havent found it yet wen and if i do the culprite is getting a coal chissel to the side of the jaw. good news is though an ea82 wagon 5sp d/r lever not push button just got traded at work beter still its that it only has around 90000kms so if i dont get my ute back thats what im goin 4:headbang:

what is a freeze plug??

i need some pics to drool over

well my dad is a qualified pattern maker and my mate works at a industrial shop

So heres the story. Thursday morning 1:30am 30/3/06 i decide to go for a cruse wit my cos next thing i know im half way down a dirt road, too far along to stop and reverse so i keep going road becomes clay, all of a sudden i hi centered on my diff in land cruser wheel ruts (92 Brumby 2wd convert with new toyo 720 snow tyres 185/75/13). now because its 1:30am im not in the mood to do a recovery so we call my cos's G/F to come pick us up. Friday nite i go back with my cos, a mate and my bro and almost get it out. i go back today sunday 2/4/06 with a toyota landcruser with a winch mud tyres etc etc to tow me out and what do i find my ute gone/stolen/pinched etc etc PS it had been raing hard in the week leading up to all this so the dirt was soft and the clay slip-er-y just a perfect end to a f*#king perfect week.

Na get the $30 one no body rust :sarcastic: the wagon looks nice and clean but then again the vortex is somethin different for me

http://www.ultimatesubaru.org/photos/data/500/thumbs/11480100_0652.jpg http://www.ultimatesubaru.org/photos/data/500/thumbs/11480100_0649.jpg http://www.ultimatesubaru.org/photos/data/500/medium/11480100_0649.jpg

this is for my brumby/brat

i was just planing on geting some 4" X 4" solid aliminum and cutting the spacers nessary to lift the crossmembers away from the body and using steel for strut top extensions etc because i can weld steel and have the aproperate certificates to weld what is needed to pass what ever scrutitany nessary to be legal

maybe the used pump is in worse condition than old 1

1: yea thes a washer spupost to be on the drain plug its larger than the engin sump plug washer. 2: normal 3: yeah thats fine but unnessary unless leaking they are tapered so they seal

Would aluminum be ok to use to build a lift kit? I just dont want to add too much weight to my ute. Also would it work if i did a 4" body lift and 5" suspension lift?

Hay update finaly got some picks of my ute 4 months after fixing it http://www.bingbox.com/go/photo/photoID=706770 http://www.bingbox.com/go/photo/photoID=697699

Man thats awsome i want no need an rx but have never seen 1 in oz i have to look into importing 1

Can you elongate the flywheel bolt holes rather than having a redrill??

Had some time today so i replaced the plugs, leads, dissy cap and rotor id runs a bit smoother but not related to the idle problem. i cleaned out my carb and adjusted the idle screw it idles ok now but i am looking for a jy webber 32/36dgav so i should have it on fairly soon but thanks for the replies.

Hay all my brumby wont idle about half way home yesterday arvo i pulled up at lights and the engine died restarted noworries and runs fine now every time i pull up at an intersection etc the enging dies any ideas?

Will do

Has ne1 moved their number plate on to the tailgate of a gen2 brumby using gen1 tailgate bits?

http://www.titanstore.com/store/images/e16.jpg What even these

http://www.ultimatesubaru.org/forum/showthread.php?t=54536

Hows this? http://www.fobtastic.net/downloads/100_0016.JPG

Sounds good man dont forget pics lots of pics