Pooparu

Well with the rally races coming up and mother's day my weekends are packed until then. Just mark your calendars and be prepared to kick some azz!

I posted the crooked finger meet and greet!

It's great for all rigs.

I know it's far in advance but I wanted to give everyone a chance to fix there rigs and open there sceduales up. I'll be leaving Portland a 10am and heading up. It's not hard to find, Just google Scotts Mills, Oregon, once you get to Scotts Mills there's only one road that gose through the town and look for a road named Crooked Finger. You can only go one way up it and you'll drive for about 10 to 15 minutes untell you reach gravel road then as you get deeper and deeper look for trails off to the left and right sides of the roads. There's tons of trails to be found. If you have any questions feel free to call or post a reply. (503-887-3070) Hope to see as many people there as posable.

I put an EA81 into my 1978 brat that way too. I have bad back problems and I don't want to injure myself. I'd much rather use a cherry picker. Man I feel like an old man. This is sounding more like a two day project than just an afternoon project. It's not as easy as a ford 302 I'll tell you that.:-\

We went up to crooked finger. It's great for stockies and hardcores. We found all kinds of new stuff up there. It's huge!

Well it sounds like I should just pull the motor. My only problem was that I didn't have a picker, but if you're willing to let me use yours that would be great. Let me know the best way to get a hold of you and we'll get together. Thanks everyone for your advise.

You win!

Is anyone aware of a step-by-step way to take both heads off of an EA82 Turbo motor with out pulling the engine? Any help or advice would be greatly appreciated.

Sorry I didn't get back to you. I thought if anybody wanted to go they would have called, but we are planning on going back up in two weeks. There was some great stuff up there, mud water, dirt and rock. It was just a great day. I'll have to post some pics. I'll post another meet and greet with the details on the next outing in two weeks.

This year We're binging a $300 Subaru in sted of the $500 one we broght last year! I must hold the title for the cheapest running and driving subaru! Maybe next year we'll shoot for $200!

We'll be leaving Portland at about 10am and ariving about 11am!

Me too. ea81 3d hatch.

I'm going to crooked finger this sunday with 3 or 4 other friends. If anyone wants to go give me a call and I can meet you in Mt. Angle and follow me up. -earl 503-887-3070:burnout:

If we just meet in Mt. Angle I can point the way. It's just 2 turns and about 10-15 minutes of country road out side Mt. Angle. (if we decide to go there) or maybe we could just split the group up for people who want to go to Crooked Finger.

It's just a hair East outside of Scotts Mills. That's cool if everyone wants to go some other place. I was just trying to think of a cool place close to Portland. I'm open for April 23rd if we have something set up by then. I think we should just have a final vote or something on all the places suggested.

We could just meet up in Mt. Angel. It's a short drive from there. There are miles and miles of trails, everything ranging from easy to "oh ************". I think everyone will enjoy it. Sometimes there’s even snow at the top of the trails.

I have a great place to go! Crooked finger, it's near Mt. Angle. We should all meet up at a common place and travel up together in a sweet subi-pac. What do you think?

I don't have a manual. It's an 1982 Subaru 2-door hatch back. I've checked all around the struts and I just can't see a way to do it, so if anyone has done it please give me a clue where to begin.

I thought I hear that you could lift the rear end up on the ea81's with out putting a lift kit on it. If so could someone let me know. I don't want a huge lift just like an 1" or so. Any help would be greatly appreciated.

I did it, but took out the subaru logo. http://img512.imageshack.us/img512/2297/2591218l1zm.jpg

Weber makes one. That's what I used.

This was my first year and I would like to say that everyone was very welcoming and gave me some great ideas for my project subarus. My buddy and I drove the $500 stock 87 GL, and we beat the ************ out of it. That thing still drove us back to Portland with no problems. Next year we'll definitely be bringing all three of our Subarus to the show. (I wonder if the potatoes ever finished cooking) We also took a few pics that we hope to have posted up soon (is there some sort of folder that people can upload everyone's pics into? I think that would be great so that everyone can see everyone's pics at the same time instead of hunting around for them)

Man I hate AMC Eagles, but mainly because they are the ugliest thing I have ever seen. On the other hand I have had the same thing said about my BRAT, so just a matter of opinion I guess. Can anyone else think of the ugliest car? (in there own opinion)

What's Jerry's Conversion kit for the shifter?