bratsrus1

Hey Subiewon This is jerry, the next update you need is the 5 speed dual range tranny. You will love your car after that mod. Thanks Jerry

Hi Chris This is Jerry, yes i made the wheels that are on my hatchbrat. The outter wheel shells came from rock stompper. com in colordao. The inside part started out as 3 eights inch flat iron then cut them out with computer plasma cutter. Then i centered them up in the lathe welded them together. I have about 10-12 hours apeice in them and i made 5 of them lots of time. I wanted to be different and thats why i made a hatchbrat different. Thanks Jerry

Hey Jibs This is Jerry, the reason i didn't play in the mud is because i didn't bring any spare parts. If i broke anything i would have to repair it on monday and mis a day of work. The hatchbrat got me to the show it had to get me back home. Thanks Jerry

Hey Meatwagon This is jerry, your correct it is # 45. If somebody has any other pictures of my car i would like to see them. Thanks Jerry

Hi Everybody This is Jerry, as a few of you guys know i am building my lifted hatchbrat. I took it to the show and got alot of really cool compliments about it. If you want to see a picture it is on the older subarus title official wcss6 picture thread. The first one from Syphon click on album 274 it is on page 3 # 42. Let me know what you think. I built the 4 inch lift, the 14x6 wheels, the bumpers, and the back wall is out of a brat, the rool bar is 3 inch and the exhaust stacks are 3 inch and they do work. It has a EA81 engine with a EA82 intake and webber carb. also 5 speed dual range tranny, rear disc and LSD. Oh it also on board air for the air horn. I know other people also took pictures but i haven't seen them. Thanks Jerry

Hey Tim This is Jerry, it sounds like your fuel pump relay. It should be a black box about 2x3 inches and 1 inch thick with 5 or 6 wires comming out of it. That small box is on the left inside of your car by the hood release cable. My brat do that had to hot wire it or bypass the box. Thanks Jerry

Hey Nutt7 This is Jerry, i hope you haven't setteled yet because it wasn't your falt. When her insureance adjuster doesn't give you what you want for the car. You tell him or her fine then repair my car or i will see you in court. Tell the adjuster i have more time than you do, you are not going to screw me out of my car. Her insurance has to repair it or give your fair market value not what they think it's worth. I know it happen to me last year to my 86 light blue brat, it took the insureance about 3 months to finnaly give me my price. Thanks Jerry

Hi Eric This is Jerry, that's a no brainer go to the show. The show is only 1 time a year and there is alot of soft ball games. This is going to be the biggest show yet and like you say subaru all the way. Also tell her there is going to be alot more different kinds of mods of subarus. There will be another soft ball game next week but not another subaru show until next year. Go to the show Thanks Jerry

Hey Guys This is Jerry, you need to move to Yakima or close to it. There is one wrecking yard the bolts and wiring are free. They look at it this way if you got time to pull it you can have it. The rest of the parts are really cheap also. Thanks Jerry

Hey bratgirl This is Jerry, email me with your address so i can send you some stuff the is made for CASE backhoes. It is the coolest stuff sence sliced bread, you can use this stuff on water on oil on gas on tranny fulid and on gear oil. If this stuff don't stop the oil leak then you got a big problem. My email is bratsrus@elltel.net Thanks Jerry

Hi Everybody This is Jerry, well as some people know i am building a lifted hatch. It's mostly done so time for a test drive. I drove it from Selah to Camby Oregon. I knew the speedo was off but that much at 68 mph i am going 80 mph. I got some of the funniest looks from those high dollar sports cars. The guys look on his face tells it all that subaru can't go that fast yes it can i got clock by state patrol. The patrol man told me to slow down, he didn't think a subaru like that would go that fast. I had no problems with the hatch ready for the show. Thanks Jerry

Hi Tom This is Jerry, yes that was done in 82 with a new brat. They stuff a 270 cid dogde super red ram HEMI with the 4 speed in it. The brat was for the quater mile race strip and poppin wheelies. The brat also had a cut down ford 9 in. rear end with slicks in the back. That was a fast ride. Thanks Jerry

Hey Freeldr This is Jerry, i have 1 of those adaptures that you are talking about. The guy is in Colorado his name is Joel and his # 1-303-287-8889. Don't call him if you are not serious about having this adapture made don't waste his time. He makes 6 of them a year and the 1 i got cost me 450.00 that was over a year ago. This guy dose a really good job on this plate. It comes with the plate and bolts and a flywheel. Like i said before don't call him if you are just jaw jacking. Thanks Jerry

Hey Rob This is Jerry, i will have to agree with you on that one because after i installed the 86 rx turbo 5 speed dual range tranny in my 86 hatch with the stock EA81. Well lets say the speed o dosen't go that fast. Thanks Jerry

Hi Mick This is Jerry, i would like 2 usmb logos. Email me with your address so i can send you the money. COOL REALLY COOL Thanks Jerry

Hey Archemitis This is Jerry,i would like to have a phone number and address so i can call them. Thanks Jerry

Hi Mick This is Jerry, if the tranny has 4 switches then 1 is for backup lights 2 is for nutral start 3 is for 4 wheel high 4 is for 4 wheel low. I have a junk 5 speed tranny i will look at it tomorrow if the switches are there you can have them. Thanks Jerry

Hi Ed This is Jerry, you used the EA82 set up and it don't need any spacers but the EA81 dose because the flywheel sticks out farther by 0.90 of an inch than the EA82 flywheel. Thanks Jerry

Hey desertsubaru This is Jerry, i use the EA81 flywheel the EA82 disc the EA81 puresser plate and the EA82 release bearing and fork. When you use this set up you will have to space your starter out a lock washer distance so it won't stay engage with the flywheel. The clutch cable is the stock 1 but sometimes you need to cut the bracket that holds the cable next to the bellhouseing. Move the cut bracket closer to the clutch fork and reweld it. Thanks Jerry

Hi Brian This is Jerry, i have tryed to contact him several times. By his own email and i am even on his Auss. board no answer. Lets just face it he stole 420.00 of my money. The only way i am going to get those gears from him is to go to Austrila and beat it out of his hide. I have NO respect for that guy, would you. This has been going on for over a year now. Thanks Jerry

Hey Mr. Brett Rogers This is Jerry, when do i get my 4.44 gears oh i get it. I paid you 420.00 U.S. dollars for nothing and it has been over a year ago when you got my money. I am saving up money to see you NOT a happy camper. A very mad Jerry

Hey Austin This is Jerry, that would be ok with me and if you want you can spend the night at my house. Let me know my cell # 509-952-2855 Thanks Jerry

Hey Austin This is Jerry, where are you? bump bump rough road i like it. Thanks Jerry

Hey Austin This is Jerry, have you found me a 93 legacy 2.2 standard brain box yet? Also when you or anybody else comes to see me do you want to test drive my lifted hatch? Wow what a rush with those exhaust stacks it sounds like it has a V8 in it. Let me know call me or email me. Thanks Jerry

Hi Ken Cook This is Jerry, i have just the parts that you need. Let me guess it is a 84 silver brat that got hit in the left front end. If it is i already know the brat. Give me a call 952-2855. Thanks Jerry