Jump to content
Registrations ×
Ultimate Subaru Message Board
Registrations

bratsrus1

Members
 View Profile  See their activity

  • Posts

    642

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by bratsrus1

  1. bratsrus1

    Hi Jake This is Jerry, i gave the 4 speed to Bill i didn't need it. The kit cost 100.00 pluse shipping. You need to send me your old parts and they are #1 the 4 speed shifter #2 the 4 speed tranny cross member #3 4x4 linkage from the 4 speed the part that gose through the rubber boot #4 the 5 speed shifter #5 the 5 speed tranny mounts all 3 of them. When you ship those parts thats what shipping will be to ship the kit. Let me know Thanks Jerry

  2. bratsrus1
    Hi This is Jerry, i have an 85 hatch back the set up in it is the engine is a 93 1.8 impreza fuel injection the tranny is a 86 rx 5 speed dual range with 3.70 gears with rear dics. This is no joke i drive 500 miles every week for work and i have check the mileage the last 5 times i have fill it up 38.4 miles per gallon. My goal is 40 miles oer gallon but that will be next spring when it warms up. You can see my hatch click on this year show pictures and on page 5 you will see a light blue hatch thats it. Thanks Jerry
  3. bratsrus1
    Hi This is Jerry, call me and i can let you know what you need to install a 5 speed dual range tranny 1-509-952-2855. Thanks Jerry
  4. bratsrus1
    Hi Aaron This is Jerry, call me i can tell you what you need to use in your set up i have done this many times. 1-509-952-2855 please call me before you spend any money on parts that you won't use or won't fit. Thanks Jerry
  5. bratsrus1
    Hi This is Jerry, yes put the 5 speed in your EA81 car with the 5 speed kit that i build it is a unbolt the 4 speed and bolt the 5 speed in to place. With this kit you keep everything stock inside of your car. Let me know if you need a kit. Thanks Jerry
  6. bratsrus1
    Hi Tyler This is Jerry, if you look at the wcss 12 pictures on page 5 you will see my light blue hatch it shows the engine compartment. It is the silver can with the flux cap. decal on it mounted in the spare tire area. Thanks Jerry
  7. bratsrus1
    Hi This is Jerry, well i did so reasurch on the EA81 speed sensor and how to conect it to an EJ swap. The EA81 only had that sensor that came with cruise control so some of the EA81 cars don't have that sensor. There are 2 wires on it 1 black that gose to ground and the other is yellow with a red stripe it gose to the EJ computer. If somebody is looking for this sensor i have an extra. Thanks Jerry
  8. bratsrus1
    Hi Andy This is Jerry, now you know how much fun i have when i drive my hatchbrat with the holley 4 barrel carb. The looks you get when you get on it fun factor yah:lol: Thanks Jerry
  9. bratsrus1
    Hi Andy This is Jerry, now you know how much fun i have in my hatchbrat with the holley 4 barrel carb. Fun factor yah and the looks you from people when you get on it, like what the **** has he got in that. Thanks Jerry
  10. bratsrus1
    Hi Tyler This is Jerry, i got my tank off of ebay cost me about 90.00 ship from China. If you want to see how i have it mounted come and see me not that far away. Thanks Jerry
  11. bratsrus1

    Hi Shaun This is Jerry, you will need to send me #1 the 4 speed shifter #2 the 4 speed tranny cross member #3 the 4x4 linkage from the 4 speed only the part that gose through the rubber boot #4 the 5 speed shifter only the part that the shift knob sdrews on to #5 the 5 speed tranny mounts all three of them. The kit cost 100.00 pluse shipping let me know my # 1-509-952-2855 Thanks Jerry

  12. bratsrus1
    Hi This is Jerry, i live in Selah Washington state so i am 3 hours difference 7 am or later is ok with me. Thanks Jerry
  13. bratsrus1
    Hi This is Jerry, yes i make a 5 speed kit for your car call me and i will let you know what to do 1-509-952-2855. Thanks Jerry
  14. bratsrus1
    Hi Rich This is Jerry, i have a 85 hatch that is the same engine compartment as your wagon has and i have a 93 impreza 1.8 engine in it fits without any cutting. Want to know more let me know. Thanks Jerry
  15. bratsrus1
    Hi This is Jerry, far cheaper to EJ it. If you look at the wcss 12 pictures there is a light blue hatch that has a 93 impreza 1.8 engine and the wiring is alot less than the legacy. I check the mileage and i am getting 34.8 miles per galon i am a happy camper. If you want to know more let me know. Thanks Jerry
  16. bratsrus1
    Hi This is Jerry, the last set of pictures did everybody notice the light blue hatch well it has the famouse flux capactior on it. I haven't drove it at 88 mph yet so i can't say if i will jump into the future. Thanks Jerry
  17. bratsrus1

    Hi Tom This is Jerry, if it is for the EA81 dipstick sure that ok with me. My address is Jerry Schmierer 755 Hexon Rd. Selah Washington 98942, i also need your address so i can ship it. Thanks Jerry

  18. bratsrus1
    Hi Flowmaster This is Jerry, i don't know the mileage yet but i can say it is in the 33-35 i will know by the end of the week. My hatch has a 93 impreza 1.8 engine and a 86 rx turbo 5 speed dual range tranny and alot more. Come to the show and see it Thanks Jerry
  19. bratsrus1
    Hi This is Jerry, well is everybody ready for thhe show? I will be bring my new hatch some of you have already seen it but now i have it all together. This hatch drives like new i am very happy with it and no it's stock lots been change. This hatch i built for gas mileage because i drive 500 miles a week for work. So everybody come and see it. Thanks Jerry
  20. bratsrus1
    Hi This is Jerry, are you running a high oxtane gas now that you have up the compression? Try a bottle of 104 oxtane bost in the tank. Thanks Jerry
  21. bratsrus1
    Hey Everybody This is Jerry, those lift blocks for the front struts are at the bottom of the strut so there for you don't need to adjust for camber. I have a set on my hatchbrat and they have been on there for 6 years i haven't had any problems yet and now i am driving it to work putting on 500 miles a week. The tires are showing no crazy ware patteren, at the top of the strut yes you have to adjust but at the bottom no adjustment needed. Thanks Jerry
  22. bratsrus1

    Hey Jonny This is Jerry, this address is it your home address or is it your work place address because it is cheaper to ship to your wrok place. Let me know Thanks Jerry

  23. bratsrus1
    Hey Connie This is Jerry, give your hubby a big wet sloppy kiss for letting you keep your subie. Thanks Jerry
  24. bratsrus1
    Hi Jibs This is Jerry, got the payment today the kit will be in the mail on monday just to let you know. Thanks Jerry
  25. bratsrus1
    Hi Shawn This is Jerry, i don't have any core parts thats why anybody wants a kit they need to send me there old parts. Thanks Jerry
×
×
  • Create New...