Search the Community
Showing results for tags 'Coils'.
Found 3 results
-
Hell folks, long time lurker first time poster. Having a heck of a bad week with my much loved outback (2004, 2.5l, Canadian). To keep things clear I will stat at the beginning... Just before Christmas, the wagon all of a sudden started to stall in neutral, or when I would press the clutch, this seemed to happen randomly when the car was warmed up. The problem went away for about ten days, only to reappear with a vengeance. (Check engine also appeared) so we bit the bullet and took it to a local garage. They said that there were misfire codes and changed the plugs/wires/coils, later in the day they called back and informed me that the problem was still there and that everything associated with the intake was heavily carbonized. So they did and injector cleaning,and cleaned all of the sensors. After that the problem was still present, they said the egr valve was too carbonized and beyond cleaning. I retrieved the car from them, deciding to find a replacement egr on my own. After removing and cleaning the egr myself (10 min job, was nice and springy after) the car seemed to work perfectly, leading me to believe we had been fleeced... The next day, leaving the city, everything was fine, until the car warmed up. Now my problem is: around 1-2000 rpm the car kicks and bucks like crazy, once past 2000 rpm the car works fine but a little jerky when giving gas, i re-cleaned the egr thinking maybe it needed further cleaning. After testing the car again today, same problem, after the engine is good and warm, it struggles and bucks when driving around in first and second gear till you are past 2000 rpm. After getting a big bill from a garage that didn't fix my problem I am dreading dropping more money at this than I have to. Anyone else have any similar experiences? Or can help me figure out what is going on? Thx in advance -
having serious regrets about messing around w/ my Loyale, "Joan Crawlins" after i finally had her in the best shape she's been in since i got her last Winter in Penn. everything was great as stock, but then i put in a 2" inch lift to gain clearance over sand in btwn the tracks on a rutted out access road to the beach. that messed up the camber of the front wheels something awful (pics here: http://s406.photobucket.com/user/GlenSzabo/library/2%20inch%20Lift%20kit%20and%2015%20inch%20Pugs) and after tracking down some 15" alloy pugs in a junkyard in Pennsylvania and ordering lugs from Dan in Sacramento, i thought that would help the camber issue, but it didn't solve nearly enough for daily driving. so pulled the lift kit out, but kept the pugs on and had to cut a bunch of the wells out cause i was getting lots of rubbing since my suspension was in bad shape. put in new struts in the front which helped, gonna put in struts in the back in the next couple days, but having no luck finding coils for the front. CAN I USE COILS FOR ANOTHER SUBARU that are easily available? like a legacy? if so, what should i get? also, now my camber is ok in the front, i'm getting positive camber in the back, which i can only guess was as a result of putting in and taking out the lift in the back. once i put in new struts in the back and hopefully coils in the front, and then get everything aligned professionally, will my camber issues be solved, theoretically? just ruing my decision to have changed anything at this point, but all's not lost by along shot and if i can get the suspension finished and the alignment solves the camber, i'll be happy to have the Pugs on rather than the stock 13"s. here's a look at where i'm at now: http://s406.photobucket.com/user/GlenSzabo/library/Loyale%20Camber%20Issues @175eya @CoyotePaws @Mechanical_Misfit thanks for the help folks, as always, i'm eternally grateful for the advice and support. -Glen
-
Car Information: 1997 Subaru Legacy GT Sedan, 2.5L DOHC Hi there, Im hoping that someone may be able to tell me why the ignition coils I had delivered for my car are not the correct ones, I've searched and searched and every coil-pack I come across is depicted as the ones I received. However the stock pack I'm attempting to replace Is a much smaller pack: Diamond F-560. The new pack will not bolt and does not possess the same connecting pin. My engine has not been swapped, I know it is a 2.5L EJ25 as I had the timing belt done about a year ago. I've been reading that my year was a "transition" year and that I may have a certain type of pack. Does anyone know about this? I'm really looking forward to continuing my troubleshooting for a misfire and I was hoping this might have been the fix. Thanks in advance for the time!
