Search the Community
Showing results for tags 'Pattern'.
Found 1 result
-
Modifying the Rear Spindle's Locking System (for Front wheel Drive -2WD- EA82 Subarus) _________________________________________________________________ When is Needed to do Service on Ball Bearings or Brake Pads / shoes on the Rear wheels of a Front Wheel Drive -2WD- EA82 Subaru, you'll notice that the Drum / Disc is held in place by a simple Nut which is prevented from spin freely by a Locking twistable Washer that Locks everything, and with time and repeated Twistings on and off, such washer trend to Break. Sometimes is even worse, the worn Washer Breaks / Fails \ Loosens the Nut while the Car is in Motion and it Makes the Bearings to Loose its tightness and can lead to a Huge Bearings Fail, Damagin' the Spindle and even it can lead to Loose a Wheel and Make a Huge Fat Crash... So, I Decided to get rid of the Washer Locking System, for a More Safer Option: I installed a Safer "Castle" Nut instead of the regular Nut, and I Drilled a Transversal Hole to the Spindle, where the castle nut settled, to Cross both the Castle Nut and the Base with a twistable Nail. Images Worth thousands of Words... See: Drilled the Transversal Hole on the Spindle, and placed the New Castle Nut Closer Perspective: Already with the Nail Crossed and Twisted: Finally, with the Original Cap ...... it Works Great! Finding a Castle Nut with same Thread and with Small Width to fit there, was very hard, I Found mines on an aftermarket store; the salesman told me they belongs to the steering arms of a '97 impreza ¿ ? I Hope this Idea Could Help Many FWD Subies Owners ... ... Kind Regards.