Search the Community
Showing results for tags 'break cut'.
Found 1 result
-
So, I've recently come into a problem. I've noticed an intermittent whirring/whistling noise coming from the center/center-bottom of the dash. Almost sounds as if there's a cd in a disc-player rotating at a high speed. I don't have a cd-player, and I've also removed the fuse from the radio, and the noise still comes. Anyway, when the noise comes on, it follows the RPMs of the motor. If I depress the accelerator, the noise gets louder. While idling (and noise present), if I press on the brake pedal the lights pretty much completely cut out, and the motor almost dies. In the videos you can hear the noise, and see the idle responses. It frequency of brake-taps is consistent with the motor behavior. ALSO, if I turn on the hazard lights, the idling bobbing/cutting with the lights cutting follows the frequency of the hazards and/or turn signals. When the whirring goes away, the symptoms are gone. Do I all of a sudden have a really bad ground? All lights are functional; nothing out. '98 OBW with 251/25D hybrid Recent work (past 6 months): New OEM MAF New OEM TPS New OEM ignition coil New OEM plugs New OEM wires New OEM 5mt neutral switch New OEM 5mt reverse light switch New Fuel pump relay (symptoms were present before I went playing under the dash) Done in the past two years: fuel pump fuel filter Timing belt New OEM Cam Gears I'm pretty bad at electrical diagnostics, any suggestions/advice would help. Battery has 12.5v just sitting. 12.8v while idling. Thanks for your time folks, Greg