vwbuge1 Posted September 18, 2009 Share Posted September 18, 2009 I have been wanting to give up the Outback for a Baja. Specifically a Baja with a 5spd and turbo. I was thinking about swapping in a 2.5 turbo. I am assuming it is a direct bolt up? But what about the ECU? just swap the turbo ecu in also? Link to comment Share on other sites More sharing options...
idosubaru Posted September 18, 2009 Share Posted September 18, 2009 it'll bolt right up but the wiring is going to be different. Link to comment Share on other sites More sharing options...
Battlewagon Posted September 19, 2009 Share Posted September 19, 2009 It will bolt right up to the bellhousing, but everthing else... I take it you have a 2000-2004 Outback, which might make things easier since that's what the Baja is based on. You will need a turbo cross member (probably from a Baja), Baja ECU, wiring harness, and exhaust manifold. You should also get yourself a baja hood for the intercooler. It's going to be just like a 'standard' STi swap, which means the wiring is going to take some time. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now