bkvail Posted September 28, 2009 Share Posted September 28, 2009 OK, I have never had a car before that didn't come stock with an ash tray. I do NOT smoke, but I've always used the ash trays in cars for a change holder! If I find an ash tray in a junk yard from a same age outback/legacy, will it be a drop-in fit? I don't want to use the little cubby in front of the arm rest for change, too hard to sort through it to get the quarters out, hehe. Link to comment Share on other sites More sharing options...
lostinthe202 Posted September 28, 2009 Share Posted September 28, 2009 an ashtray from any 96-99 should work Link to comment Share on other sites More sharing options...
davebugs Posted September 28, 2009 Share Posted September 28, 2009 Yes the 95-99 should work. But look at the ashtray "tracks" first. I've sold quite a few of them and had a lady here saturday that needed the "tracks" in addition to the ashtray. That's why the ashtray was missing. Link to comment Share on other sites More sharing options...
bkvail Posted September 28, 2009 Author Share Posted September 28, 2009 Yes the 95-99 should work. But look at the ashtray "tracks" first. I've sold quite a few of them and had a lady here saturday that needed the "tracks" in addition to the ashtray. That's why the ashtray was missing. I don't have any ''tracks'' in my spot where the ash tray should be - just a smooth cubby. And the ''lighter'' spot says not to use a lighter in it, LOL. not that I would though, LOL Link to comment Share on other sites More sharing options...
WoodsWagon Posted September 28, 2009 Share Posted September 28, 2009 You need to bring a 90 degree bent phillips screwdriver to get the two screws that go up vertically into the mouth of the pocket. Get the bracket that goes with the ashtray and unplug the wiring that goes to the light on top of the ashtray. Most likely there is a corresponding connector on your harness for it to plug into. Link to comment Share on other sites More sharing options...
bkvail Posted September 29, 2009 Author Share Posted September 29, 2009 You need to bring a 90 degree bent phillips screwdriver to get the two screws that go up vertically into the mouth of the pocket. Get the bracket that goes with the ashtray and unplug the wiring that goes to the light on top of the ashtray. Most likely there is a corresponding connector on your harness for it to plug into. Thanks! I'll check it out sometime this week..... Link to comment Share on other sites More sharing options...
bkvail Posted October 12, 2009 Author Share Posted October 12, 2009 well, I went to the local pull-a-part and they had a legacy with the same color interior and a never-used ash tray in it! I was able to get the tray and the sliders for $1.50 plus tax (plus the $1 for the 'entry fee'). So, a grand total of $2.63 Anybody want the little pocket cubby that came out of that spot? It's dark gray Link to comment Share on other sites More sharing options...
johnceggleston Posted October 12, 2009 Share Posted October 12, 2009 (edited) well, I went to the local pull-a-part and they had a legacy with the same color interior and a never-used ash tray in it! I was able to get the tray and the sliders for $1.50 plus tax (plus the $1 for the 'entry fee'). So, a grand total of $2.63 Anybody want the little pocket cubby that came out of that spot? It's dark gray i'll take it. how does it bolt in? how much? pm sent. john Edited October 12, 2009 by johnceggleston Link to comment Share on other sites More sharing options...
bkvail Posted October 12, 2009 Author Share Posted October 12, 2009 i'll take it. how does it bolt in? how much? pm sent. john It just snaps into place, no bolts or screws. If you have an ash tray right now, then you would need to take out the 'sliders' for the ash tray (will need a angled phillips screw driver for two short screws in front/top, and a long phillips screwdriver for a screw all the way in the back/middle) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now