Devil240Z Posted September 30, 2009 Share Posted September 30, 2009 can it fit? what years? would a WRX Header bolt up to a EJ22? I was hoping I might be able to use a WRX header with a STi exhaust. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 30, 2009 Share Posted September 30, 2009 No and it would kill the performance anyway. GD Link to comment Share on other sites More sharing options...
Devil240Z Posted September 30, 2009 Author Share Posted September 30, 2009 So what do you suggest I do? what does everyone else do for exhaust? Link to comment Share on other sites More sharing options...
subaru360 Posted September 30, 2009 Share Posted September 30, 2009 On a 91 legacy? Use the stock parts. Nothing you do will add power just noise. Link to comment Share on other sites More sharing options...
Danbob99 Posted September 30, 2009 Share Posted September 30, 2009 On a 91 legacy? Use the stock parts. Nothing you do will add power just noise. Harsh. I would bet you get a bit more performance if you free up the exhaust flow with some high flow cats. Not much, but if done right there will be some. I would reccomend visiting a pro exhaust shop though to have some one fabricate you something. It'll cost you, but it'll fit right and work well. Most Subaru exhaust stuff doesn't swap very freely between the different era and body style cars. Just my .002 cents. Dan Link to comment Share on other sites More sharing options...
Durania Posted October 1, 2009 Share Posted October 1, 2009 I tried several years ago to put an STi catback on a 91 Legacy. Its not a bolt up job. If you are wanting it that bad, spend about $60 and take it and the car to a muffler shop. Link to comment Share on other sites More sharing options...
bheinen74 Posted October 1, 2009 Share Posted October 1, 2009 thats the clean install of a 05 STi axle back on my 92 Legacy Turbo Sport Sedan. for a 91 legacy NA you are barking up the wrong tree..if you had factory turbo engine, maybe like me, but on a ej22 NA no go. Link to comment Share on other sites More sharing options...
bheinen74 Posted October 1, 2009 Share Posted October 1, 2009 even that mount hook had to get cut off and rewelded..like in the pic Link to comment Share on other sites More sharing options...
The Scooby Posted October 1, 2009 Share Posted October 1, 2009 i put a WRX stock cat-back on my 94 Ti i had a few years back. there was no difference in how it pulled, it was still slow, but it gave it a nice sound and anytime you put a freer flowing exhaust you will be more efficient. so will you feel the difference, no unless you have a problem like a clogged cat. will it sound different and look nice. i think so. Link to comment Share on other sites More sharing options...
Devil240Z Posted October 1, 2009 Author Share Posted October 1, 2009 Hmm well I do think my cat is clogged. also I wouldn't mind a little more noise. I might try to get an STi muffler and make the rest from scratch. My buddy is more than willing to fab me up an exhaust with his handy dandy welder. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now