desdinova Posted October 1, 2009 Share Posted October 1, 2009 putting the finishing touches on an assembly and it's been so long since i started that i forgot a few things . i can't recall where each of these brackets went and where the vacuum hoses from the green fitting on the front go to . thanks for your help . jim . [/img][/img] Link to comment Share on other sites More sharing options...
GeneralDisorder Posted October 1, 2009 Share Posted October 1, 2009 Which pushrod engine is this and what year? I've never seen a thermo-vacuum valve in that location before.... GD Link to comment Share on other sites More sharing options...
desdinova Posted October 1, 2009 Author Share Posted October 1, 2009 1981 ea81 hatchback Link to comment Share on other sites More sharing options...
markjw Posted October 1, 2009 Share Posted October 1, 2009 I can't contribute much except to say that I have seen that valve in that location before. It was on a parts car I had for just a short while. I have always wondered about it. I just thought it was part of the block heater. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted October 1, 2009 Share Posted October 1, 2009 '81 explains it - they didn't offer power steering till '82 and that valve and it's associated vacuum lines would interfere with the EA81 power steering belt. That valve was probably moved to the manifold. GD Link to comment Share on other sites More sharing options...
nolicense Posted October 1, 2009 Share Posted October 1, 2009 i got an 81 ea81 hatch but not that sensor Link to comment Share on other sites More sharing options...
desdinova Posted October 2, 2009 Author Share Posted October 2, 2009 no guesses on where they go to ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now