danrenfroe2016 Posted October 14, 2009 Share Posted October 14, 2009 Have searched around, but not found a whole lot. What do you guys use for Land anchors? And I am mostly interested in the No cost / Low cost ones. Thanks. -Daniel Link to comment Share on other sites More sharing options...
TeamCF Posted October 14, 2009 Share Posted October 14, 2009 You could proly fab one of these up for very little if you have a good trustworthy welder. https://www.expeditionexchange.com/cart/product.php?productid=18555&cat=268&page=3 Link to comment Share on other sites More sharing options...
danrenfroe2016 Posted October 14, 2009 Author Share Posted October 14, 2009 (edited) You could proly fab one of these up for very little if you have a good trustworthy welder.https://www.expeditionexchange.com/cart/product.php?productid=18555&cat=268&page=3 Ya I have seen that Before, a Fixed, non folding unit could be built fairly easy. Does a long steel steak beat into the ground work at all? -Daniel Edited October 14, 2009 by danrenfroe2016 Spelling Link to comment Share on other sites More sharing options...
bheinen74 Posted October 14, 2009 Share Posted October 14, 2009 (edited) http://cgi.ebay.com/ebaymotors/4X4-Winch-Emergency-Anchor-Point-System-Off-Road-Truck_W0QQcmdZViewItemQQhashZitem439aa8f527QQitemZ290357572903QQptZMotorsQ5fATVQ5fPartsQ5fAccessories#ht_2901wt_1138 2 long stakes, with a cross support that has cleats Edited October 14, 2009 by bheinen74 Link to comment Share on other sites More sharing options...
monstaru Posted October 14, 2009 Share Posted October 14, 2009 Ya I have seen that Before, a Fixed, non folding unit could be built fairly easy. Does a long steel steak beat into the ground work at all?it could, but the anchor itself needs to have some type of cleats to bite into the dirt harder when you are pulling on it............. the type you buy , like in the link above, are designed to get more bite,by digging deeper as you pull.this due to the angle of the spade in relation to the ground and direction of pull.so , i imagine alot of ************ will work, just keep the basic design features in mind when you are building it. -Daniel cheers, brian Link to comment Share on other sites More sharing options...
danrenfroe2016 Posted October 14, 2009 Author Share Posted October 14, 2009 http://cgi.ebay.com/ebaymotors/4X4-Winch-Emergency-Anchor-Point-System-Off-Road-Truck_W0QQcmdZViewItemQQhashZitem439aa8f527QQitemZ290357572903QQptZMotorsQ5fATVQ5fPartsQ5fAccessories#ht_2901wt_1138 2 long stakes, with a cross support that has cleats Wow that looks like a simple setup. Looks like it would work good though. -Daniel Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now