hardtail_pride Posted October 18, 2009 Share Posted October 18, 2009 Car is a 94 Loyale wagon. EA82 So i have gotten hung up on the clearing codes issue. The repair page tells me somewhat vaguely - Connect "Self-Diagnostic" connectors, and the "Read Memory" connectors that are usually located right next to the diagnostic connectors. The problem i have is where are these connectors?! I looked under the dash near the steering wheel for any connectors this color and came up with nothing. (it was in the dark with a flashlight though) Just to re assure me, are they under the dash or under the hood?! Thanks for the help. Link to comment Share on other sites More sharing options...
Turbone Posted October 18, 2009 Share Posted October 18, 2009 Try looking under the hood between the strut top and windshield wiper motor. Green and black connectors. Theres a write up in the USRM on resetting/reading the codes. You can also unhook the battery for 15min. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted October 18, 2009 Share Posted October 18, 2009 You shouldn't have to really clear them - they will go away on their own once you fix the problem. The old SPFI computers are pretty simple. Hell - even my '91 Legacy Turbo does the same thing. Once I fixed the knock sensor and wireing to it the code just stopped all by itself. GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now