hatchsub Posted November 11, 2009 Share Posted November 11, 2009 I just pulled the fuel filter out and am going to replace some fuel line while im at it. I noticed that 5 years ago when i replaced i had put the lines towards the bottom and the filter element towards the top. That didnt seem correct to me though. Should the filter part be towards the bottom and the lines at the top to get the most use out of the fliter? I think i mixed it up 5 years ago but cant remember for sure. Link to comment Share on other sites More sharing options...
bobaru Posted November 11, 2009 Share Posted November 11, 2009 (edited) IIRC there are fuel flow arrows on all fuel filters. At least most that i've bought do. to answer your ? yes Edited November 11, 2009 by bobaru Link to comment Share on other sites More sharing options...
Redcap Posted November 11, 2009 Share Posted November 11, 2009 Yes, there is a flow direction. Link to comment Share on other sites More sharing options...
hatchsub Posted November 11, 2009 Author Share Posted November 11, 2009 Yea i knew about the flow direction but didnt know if the lines should be towards the bottom or towards the top of the filter when installed. I did get my answer not too long ago however and finished the job off. For future information...the lines should be towards the top of the filter when installed correctly. This only goes for the filter near the tank however. Engine bay filter should be lines on the bottom except for the vapor line which is at the top. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now