idosubaru Posted November 12, 2009 Share Posted November 12, 2009 Went to remove the doors from my Legacy GT parts car - one of the rear door bolts is a stud going into the interior. After removing the trim I see that it's a VERY long stud with a nut at the base. I don't have the right size deep socket, but that thing is so deep I don't even know if a standard deep socket would work. Anyone know what i'm talking about? Link to comment Share on other sites More sharing options...
Fairtax4me Posted November 12, 2009 Share Posted November 12, 2009 Not really. A Gearwrench ratchet would probably come in handy for something like that. They make extensions that are hollow so you can fit sockets over extremely long studs or threaded rods. Link to comment Share on other sites More sharing options...
idosubaru Posted November 12, 2009 Author Share Posted November 12, 2009 not sure what a gear wrench ratchet is but there's no access to it because it's recessed way down inside the B pillar, so front straight on/up above it is the only access, has to be a socket. i just hope a regular extension socket is long enough, doesn't look like like. and im' not sure what size it is - looks to be 12 mm so it probably is. guess i could hand thread another 12mm on top to be sure. Link to comment Share on other sites More sharing options...
lmdew Posted November 12, 2009 Share Posted November 12, 2009 Must be non - stock configuration. All of the doors I've removed have always been bolts going into the frame and the door. You could always pull the hinge off the door side instead. Link to comment Share on other sites More sharing options...
idosubaru Posted November 12, 2009 Author Share Posted November 12, 2009 right on larry - after i read your post i just went to see there are 4 12mm holding the door to the hinge i can remove those instead, thanks! as for non-stock - this definitely looks OEM, paint and bolts, both sides are identical, and all. maybe it's a year or GT or something else difference? i've never removed a rear door before. Link to comment Share on other sites More sharing options...
Fairtax4me Posted November 12, 2009 Share Posted November 12, 2009 Gearwrench is the brand. http://www.gearwrench.com/catalog/xl_pass-thru_system/gearratchet/ Really cool tools, but the price tags are up there. Lifetime warranty on all tools. And they're tough as nails. Link to comment Share on other sites More sharing options...
subaru360 Posted November 12, 2009 Share Posted November 12, 2009 I've seen those before. We just unbolted the hinge on the door side too. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now