GeneralDisorder Posted November 26, 2009 Share Posted November 26, 2009 Went looking for injectors and I see that MT's have black top injectors and AT's have white tops. Anyone know the flow rate difference? GD Link to comment Share on other sites More sharing options...
Legacy777 Posted November 26, 2009 Share Posted November 26, 2009 There is a difference between injector types between the 90-91 AT & MT non turbo models. I don't know if there is a size difference, but the type matches the ECU type, Hitachi or JECS. The 92-94 non-turbo models have a completely different type (red top) and I've heard rumors they flow a little more than the 90-91 non-turbo models. The 92's are rated at 270 cc/min. The 91-94 turbos are pink and rated at 370 cc/min. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 26, 2009 Author Share Posted November 26, 2009 Yeah - this is a '91 that I'm working on. AT. I went looking for injectors and realized the difference. I don't know what it is about the 90/91's but they seem more sporty than the 92-94. Different ECU I guess. This '91 is a rocket compared to the '92 wagon we sold a few months ago. Both AT's, and both with excelent maintenance history - the '91 really moves where the '92 was rather slower. GD Link to comment Share on other sites More sharing options...
Legacy777 Posted November 30, 2009 Share Posted November 30, 2009 The gearing is different between the 90-91 AT's & the 92-94 AT's. That probably accounts for some of what you're seeing. This spreadsheet shows the gearing difference. http://main.experiencetherave.com/subaru/techinfo/Legacy_Speed_Calculator.xls Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 30, 2009 Author Share Posted November 30, 2009 Yeah - that might account for those two. I also recently had the experience of working on a '90 MT sedan with 4.11, and also just did a tranny swap into a '96 sedan where I installed a '93 tranny and rear diff making it also a 4.11 car. Both EJ22's though the '96 had single port heads. The '90 was much sportier feeling where the '96 was pretty much a slug. Both ran very well and in fact the '90 had 255k on it (mobile 1 synth most of it's life), and the '96 only had 113k on it. I suppose the '96 must be slightly heavier - they apparently are a couple inches longer. GD Link to comment Share on other sites More sharing options...
Hondasucks Posted December 1, 2009 Share Posted December 1, 2009 Went looking for injectors and I see that MT's have black top injectors and AT's have white tops. Anyone know the flow rate difference? GD Hmm I wonder if that's why my 90 Legacy has sporadic check engine lights and other anomalies. I think someone stuffed a AT engine into it (it's a 5 speed), it used to have the AT style idle control valve, but I finally swapped it out to the proper MT valve... I'm tempted to find a MT intake manifold and just swap everything and see if it runs better... Link to comment Share on other sites More sharing options...
Legacy777 Posted December 1, 2009 Share Posted December 1, 2009 The AT / MT thing doesn't really make that big a deal as long as the ECU matches MAF sensor, IAC sensor, and injectors. The other differences aren't that big a deal. The above is only applicable on the 90-91 non turbo models. 92-94 they all had JECS based electronics. Link to comment Share on other sites More sharing options...
Hondasucks Posted December 2, 2009 Share Posted December 2, 2009 hmm so I really should source some injectors for my 90 Legacy... Or a complete intake... The IAC and MAF are correct, now, lol the IAC was the wrong one when I got the car... Link to comment Share on other sites More sharing options...
Quidam Posted December 2, 2009 Share Posted December 2, 2009 "The AT / MT thing doesn't really make that big a deal as long as the ECU matches MAF sensor, IAC sensor, and injectors. The other differences aren't that big a deal. The above is only applicable on the 90-91 non turbo models." What I've seen for 1990 L is black, MT. blue, AT, pink, MPFI, and I don't know about the green. I'm going to read the reast of the thread now:) Doug Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 2, 2009 Author Share Posted December 2, 2009 I have a '91 AT with white top's, and a '90 AT with white tops and I've seen black on '90/'91 MT's. The turbo injectors on my '91 are pink. I've never seen blue or green on a gen 1. They should all be MPFI so I don't know what you mean by that? GD Link to comment Share on other sites More sharing options...
Quidam Posted December 2, 2009 Share Posted December 2, 2009 Yea, all MPI. I missed a gear? Doug Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 2, 2009 Author Share Posted December 2, 2009 It sounded like you meant pink was for MPFI models. Perhaps you meant "turbo" but your fingers didn't comply with the thought? Where have you seen blue/green injectors on a '90? GD Link to comment Share on other sites More sharing options...
Quidam Posted December 2, 2009 Share Posted December 2, 2009 (edited) "Where have you seen blue/green injectors on a '90?" Hey GD, I was looking at them in parts catalogs. My 1.2 injectors are top feed and it looks like a direct swap with some other Subaru injectors. I'm just not sure exactly what fits what, at this point. Edit:STANDARD MOTOR PRODUCTS Part # FJ386 {Intermotor} New; w/ A.T. $101.79$0.00$101.79 STANDARD MOTOR PRODUCTS Part # FJ446 {Intermotor} New; w/ M.T. $101.79$0.00$101.79 AIRTEX Part # 4G1536 w/Auto. Trans., MPI; 16611-AA090 $110.79$0.00$110.79 AIRTEX Part # 4G1535 w/Man. Trans., MPI; 16611-AA120* Non-stock item--shipping delayed up to 2 business days $105.89 Now that I see these, those "blue" ones, with the white tops, may be the ones you're talking about. These are all new, I looked again and the re-mans are the green ones. Edit: And the pink.PYTHON Part # 638161 {#16611AA090} AT; MPI Edited December 2, 2009 by Quidam Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 2, 2009 Author Share Posted December 2, 2009 Huh - I was only refering to the color of the top - where the harness plug is. I didn't think the color of the filter screen mattered since you can't see that when they are installed..... all the OEM injectors I've pulled had the same black filter screen (white, black, and pink tops) so I think that's just the aftermarket people that do that. GD Link to comment Share on other sites More sharing options...
Quidam Posted December 2, 2009 Share Posted December 2, 2009 (edited) Here's what I have. OEM is Denso with blue tops. Aftermarket new are green...far as I can tell. These feed about 25 hp each stock. This 1996 2.2 looks pretty close. Edited December 2, 2009 by Quidam Link to comment Share on other sites More sharing options...
Quidam Posted December 2, 2009 Share Posted December 2, 2009 "Huh - I was only refering to the color of the top - where the harness plug is. I didn't think the color of the filter screen mattered since you can't see that when they are installed....." Ah, I didn't know that. I haven't worked on any of these cars yet. Link to comment Share on other sites More sharing options...
Legacy777 Posted December 2, 2009 Share Posted December 2, 2009 Here's what I have. OEM is Denso with blue tops. Aftermarket new are green...far as I can tell. These feed about 25 hp each stock. These are top feed and do not fit the first gen legacies. Link to comment Share on other sites More sharing options...
coldfusion21 Posted November 24, 2010 Share Posted November 24, 2010 sorry to bump an old thread but this seemed like a good place to ask about first gen legacy injector differences. I have a 1990 legacy AT. I need to source some injectors for it, but have been told that 90 injectors commonly fail and are specific to that model year only, hence making them rare on the used market. I wanna know what other injectors will work with my car, including the AT vs MT thing. i went and looked up some injectors on rockauto and noticed the AT injectors were almost double the MT ones... If other injectors will work i will likely source a good used set, hopefully from mountain tech. Link to comment Share on other sites More sharing options...
eulogious Posted November 24, 2010 Share Posted November 24, 2010 (edited) sorry to bump an old thread but this seemed like a good place to ask about first gen legacy injector differences. I have a 1990 legacy AT. I need to source some injectors for it, but have been told that 90 injectors commonly fail and are specific to that model year only, hence making them rare on the used market. I wanna know what other injectors will work with my car, including the AT vs MT thing. i went and looked up some injectors on rockauto and noticed the AT injectors were almost double the MT ones... If other injectors will work i will likely source a good used set, hopefully from mountain tech. I updated my thread yesterday and was just a few threads down and answers your question exactly as this is what I just went through http://www.ultimatesubaru.org/forum/showthread.php?t=117696 Hope it helps! Edited November 24, 2010 by eulogious Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now