RAugur33 Posted December 2, 2009 Share Posted December 2, 2009 In process of lift/ejswap/5speed DR swap into 84 wagon. Engine and transmission are in and 5 speed works. I am stuck in 4wd and can't get out!!!!! I have tried pulling, prying, disconnecting selector and disengaging by hand and nothing. Suggestions? Link to comment Share on other sites More sharing options...
()__1337_CRAYOLA__()> Posted December 2, 2009 Share Posted December 2, 2009 check to see if you put one of the bolts in backwards right at the shift lever Link to comment Share on other sites More sharing options...
edrach Posted December 2, 2009 Share Posted December 2, 2009 Did you just put it in 4WD and now it won't come out? Or have you done some recent work on it? I had my '86 wagon stuck in 4WD and found the way to get it out, was to let if drive backwards for about 20 yards (in gear), then depress the clutch and pop the lever back into 2WD. Link to comment Share on other sites More sharing options...
crazyman03 Posted December 2, 2009 Share Posted December 2, 2009 check to see if you put one of the bolts in backwards right at the shift lever check that.. there was a thread not so long ago that this was the solution. found here: http://ultimatesubaru.org/forum/showthread.php?t=105976 also, i had the same issue, wasnt changing anything around though... i was bound up so i jacked the back tires off the ground.. gave them a slight spin and the d/r lever was able to disengage. -Justin Link to comment Share on other sites More sharing options...
RAugur33 Posted December 2, 2009 Author Share Posted December 2, 2009 Backing up did not good. I jacked up drivers side; removed drive shaft and she shifted like butter..... like butter! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now