logic23 Posted December 11, 2009 Share Posted December 11, 2009 Hey "the group", I took some pics of a timing belt/ cam switch job. heres the link to the pics http://www.facebook.com/photo.php?pid=66521&l=5b48c08a6b&id=100000515483785 This way you can hold the cam gears so that you can torque them correctly. This is the old timing belt. MAKE SURE YOUR CRANK GEAR'S TIMING MARK IS LINED UP. When the crank gears mark is up the pistons are 1/2 the way down so that the pistons can't hit the valves if the cam turns too far. Link to comment Share on other sites More sharing options...
lostinthe202 Posted December 11, 2009 Share Posted December 11, 2009 This link seems to go to your pic of the crank sprocket from your other post Link to comment Share on other sites More sharing options...
logic23 Posted December 11, 2009 Author Share Posted December 11, 2009 yeah i was lazy and didn't make a new album. its the last two pics Link to comment Share on other sites More sharing options...
lostinthe202 Posted December 11, 2009 Share Posted December 11, 2009 Soooo, you have to have a myface account to see it? Link to comment Share on other sites More sharing options...
logic23 Posted December 11, 2009 Author Share Posted December 11, 2009 I dont think so... ill post the pics here when i have a min to upload to my sever. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now