BLUE84GLWAGON Posted December 11, 2009 Share Posted December 11, 2009 i`m trying to put on some 6 lugs hubs i purchased i have the back done ,but the fronts ?? idk i removed the kotter pin and the 4 bolts from the hub to the rotor . now is the center piece threaded or what , and if so are the threads lh or rh threads ? i`ve never had to do anything to my wagon in the front so i`m coming to the experts please help thanks danny Link to comment Share on other sites More sharing options...
Ricearu Posted December 11, 2009 Share Posted December 11, 2009 it should slide off. first get the cone washer out by tapping the hub with a hammer on the sides Link to comment Share on other sites More sharing options...
zyewdall Posted December 11, 2009 Share Posted December 11, 2009 You said you removed the cotter pin... did you remove the giant nut that holds the whole thing on the axle? Usually, once you remove that, the whole hub/brake rotor slides right off easily. Link to comment Share on other sites More sharing options...
BLUE84GLWAGON Posted December 11, 2009 Author Share Posted December 11, 2009 thanks the cone washer had a small grove as it might be threaded, i tapped it some but thought i woulds come to the pro`s b4 i got ahead of myself !!!! thanks guys and gotta run finish my conversion Link to comment Share on other sites More sharing options...
BLUE84GLWAGON Posted December 11, 2009 Author Share Posted December 11, 2009 MY SIX LUG SWAP IS COMPLETE, NOW GOTTA HUSTLE TIRES !!!! THANKS FOR BEING THERE TEXAS dont have alot sources for tech questions thanks again danny from texas Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now