RAugur33 Posted December 19, 2009 Share Posted December 19, 2009 (edited) I want to build a snorkel for my wagon and looking for ideas. Please post pics of snorkel and under hood setup if possible. Also note materials used. Thanks. Edited December 19, 2009 by RAugur33 Link to comment Share on other sites More sharing options...
Uberoo Posted December 19, 2009 Share Posted December 19, 2009 I don't know if this will help you but I just picked up a spfi intake horn.That will connect directly to my carb and it will be the beginning of a snorkel.. so if you have a carb theres how to get started.If you have spfi,its just a matter of relocating the filter to someplace more suitable.. Link to comment Share on other sites More sharing options...
Markus56 Posted December 19, 2009 Share Posted December 19, 2009 (edited) Here is mine 2" pvc pipe which will be hooked into a fuel injection intake on a stock carb And here is the car it came off of Edited December 19, 2009 by Markus56 Link to comment Share on other sites More sharing options...
coldfusion21 Posted December 19, 2009 Share Posted December 19, 2009 Just a thought guys but if you have water up over your engine enough to need a snorkel that goes to the roof, you will have lots of other issues i would think. Diff and tranny vents, floor vents, electrical stuff on the engine etc... Link to comment Share on other sites More sharing options...
Markus56 Posted December 20, 2009 Share Posted December 20, 2009 quiet you. your giving away our secret your right though. its more for show (fo' sho') the car will survive a quick dip though. Link to comment Share on other sites More sharing options...
backcountrycrui Posted December 20, 2009 Share Posted December 20, 2009 Besides where snorkels are used widely its not for water crossings. They are used to get cleaner less dusty, cooler air. The guy in front of you could be kicking up some nasty dust and a snorkel is there to keep most of it out of your air cleaner. For this use they are of great value. Plus they look cool:banana: Mike Link to comment Share on other sites More sharing options...
RAugur33 Posted December 20, 2009 Author Share Posted December 20, 2009 Lots of jibber-jabber; not a lot of pictures! How are you plumbing the snorkel into your air filter; EJ22? Link to comment Share on other sites More sharing options...
backcountrycrui Posted December 20, 2009 Share Posted December 20, 2009 When I take on this project, Im thinking about going down to an exhaust shop near here and have them bend up some pipe for the intake and then out through the fender. I think I saw on another post where a guy used a (house) roof top rubber flange(like for you sink breather pipe) to transition out through the fender? Looked like it worked well. Now I cant find the post:mad: I figure it shouldnt be too expensive for my new carbed wagon. For now Im still fighting a mouse nest smell. Mike Link to comment Share on other sites More sharing options...
Qman Posted December 20, 2009 Share Posted December 20, 2009 Just a thought guys but if you have water up over your engine enough to need a snorkel that goes to the roof, you will have lots of other issues i would think. Diff and tranny vents, floor vents, electrical stuff on the engine etc... For a lot of water these are required. My Hatch and Brat had these. Also, you'll need to seal the disty to keep water out of there as well. quiet you. your giving away our secret your right though. its more for show (fo' sho') the car will survive a quick dip though. Not hardly! The "for show" guys didn't go where the Hatch Patrol went. Besides where snorkels are used widely its not for water crossings. They are used to get cleaner less dusty, cooler air. The guy in front of you could be kicking up some nasty dust and a snorkel is there to keep most of it out of your air cleaner. For this use they are of great value. Plus they look cool:banana:Mike Partially true. We had a lot of times where both water amd dust were an issue. There were several times when water up to the windshield was the norm. Here is my snorkel. I have not found any pics of the engine compartment though. This was before the snorkel Link to comment Share on other sites More sharing options...
Qman Posted December 20, 2009 Share Posted December 20, 2009 Here's a better pic of the snorkle. Link to comment Share on other sites More sharing options...
Qman Posted December 20, 2009 Share Posted December 20, 2009 Also, a search revealed these posts. http://www.ultimatesubaru.org/forum/search.php?searchid=900640 Some are very old and have bad links but the info is there for the finding. Link to comment Share on other sites More sharing options...
backcountrycrui Posted December 20, 2009 Share Posted December 20, 2009 Qman, I never thought of spelling it both ways:grin:. Im guessing that you took of the fender to route your pipe that way???? It looked sharp. Mike Link to comment Share on other sites More sharing options...
RAugur33 Posted December 20, 2009 Author Share Posted December 20, 2009 Thanks for the inputs.... QMAN, your link is broken. Link to comment Share on other sites More sharing options...
Qman Posted December 20, 2009 Share Posted December 20, 2009 Thanks for the inputs.... QMAN, your link is broken. Yep, had that problem before. Go to search, then advanced search, then enter snorkle/snorkel in the keyword area, then enter. Link to comment Share on other sites More sharing options...
BEECHBM69 Posted December 20, 2009 Share Posted December 20, 2009 Here's a better pic of the snorkle. Stupid question, but with the opening turned that way, would it function as a poor man's "ram air" of sorts at speed? Awesome hatch, and nice job on the fender opening btw. Dan Link to comment Share on other sites More sharing options...
Qman Posted December 20, 2009 Share Posted December 20, 2009 It was a theory but never proven. I really doubt it as the tube and bends combined for about 5-6 feet in length, Link to comment Share on other sites More sharing options...
BEECHBM69 Posted December 20, 2009 Share Posted December 20, 2009 It was a theory but never proven. I really doubt it as the tube and bends combined for about 5-6 feet in length, I'm not an expert on this sort of thing by any means, but if the tube were pressurized due to forward motion, would that overcome the length of the tubing, bends etc? I can see it being an issue when air is just being drawn in. Sorry for the sophomoric questions, I guess this is semi on topic still? Dan Link to comment Share on other sites More sharing options...
strat Posted December 20, 2009 Share Posted December 20, 2009 you'd have to be going pretty fast to actually achieve a ram air effect. the motor draws in alot of cfm by itself and to overcome that to get any kind of force feeding, you'd have to be moving i'd say at least 70mph. Link to comment Share on other sites More sharing options...
Zefy Posted December 24, 2009 Share Posted December 24, 2009 i am probably going to to rigging one up for the wagon. it still has the stock carb plumbing going into the inner fender. probably a bad call... do people still use the stock air can? or replace it with something else? the ram air affect was doesn't actually start 'ramming' until about 180mph depending on engine size, opening, etc etc... so don't expect anything. in fact it is probably worse for performance. Link to comment Share on other sites More sharing options...
bobs97c5 Posted December 29, 2009 Share Posted December 29, 2009 (edited) I've posted pics of my snorkel before, but here you go: It's 3" exhaust pipe custom done at my friend's exhaust shop. It's mounted with some tabs on the snorkel that are bolted down to nuts that are welded onto the a-pillar. I topped it off with a Safari Snorkel head and then plumbed it under the hood to an in-line enclosed K&N Apollo air filter. If it weren't for the great deal my friend gave me on the parts and labor, then this would probably cost more than most people want to spend on a Subaru snorkel. Besides getting cooler and cleaner air, so far it has only really helped with driving through deep puddles and streams on trails that splashed up under the hood. I don't have plans of doing any river fording considering the rest of my car is not water-proofed. Edited December 29, 2009 by bobs97c5 fixed IMG's Link to comment Share on other sites More sharing options...
bobs97c5 Posted December 29, 2009 Share Posted December 29, 2009 Here is mine2" pvc pipe which will be hooked into a fuel injection intake on a stock carb Your wagon is coming along nicely Markus! I'm glad the snorkel worked out for you. ~Bobby Link to comment Share on other sites More sharing options...
jbbvw Posted January 11, 2010 Share Posted January 11, 2010 2" ABS, 2 1/4" flex hose to modifiied mid 80s S10 4cyl air cleaner on a weber. Works awesome! I've had water up to the windshield several times. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 11, 2010 Share Posted January 11, 2010 OK Ixve seen all these "snorkles" now lets see them in action with your car in deep water or are they just for looks? Link to comment Share on other sites More sharing options...
88Subi4x4 Posted January 12, 2010 Share Posted January 12, 2010 [/img] Link to comment Share on other sites More sharing options...
TeamCF Posted January 13, 2010 Share Posted January 13, 2010 OK Ixve seen all these "snorkles" now lets see them in action with your car in deep water or are they just for looks? hehe, yeah! I like Qman's and jbbvw's. Keep from having smashed PVC pipe all over a tight trail. Been wanting to do a snorkle for quite awhile myself. Though I've been through some long deep stuff that had water up splashing the windshield, coming in thorugh the doors, ect. And been lucky to not have an engine problem yet (finds a piece of wood to knock on). Drained the diff a couple times though. Keeping the right wake in front of you helps. But if you have to stop... Snorkle time. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now