Okin Posted December 19, 2009 Share Posted December 19, 2009 I know it's a bit over board, but I like the feel. It will soon go back to factory after the snow:) Horn must be relocated in order to do this, unless someone can show/tell me how??? and No... I don't have cruise... Link to comment Share on other sites More sharing options...
bratman18 Posted December 19, 2009 Share Posted December 19, 2009 how did you do it?? Link to comment Share on other sites More sharing options...
Okin Posted December 20, 2009 Author Share Posted December 20, 2009 how did you do it?? It's magic Seriously, the steering shafts are the same size. I did'nt cut into the wiriing to find the horn. I'll eventually find an aftermarket wheel w/out an airbag to install but for now, I like the feel of this one. Link to comment Share on other sites More sharing options...
bratman18 Posted December 20, 2009 Share Posted December 20, 2009 Sweet. That's good to know. For some reason, I thought the steering shafts were different sizes Link to comment Share on other sites More sharing options...
Okin Posted December 22, 2009 Author Share Posted December 22, 2009 I did'nt cut into the wiriing to find the horn. Fixed. My horn now works. I found out that all I had to do was run the wire(It was a green/black wire) from the column to the inner bracket of the wheel, and it worked. Link to comment Share on other sites More sharing options...
TheLoyale Posted December 23, 2009 Share Posted December 23, 2009 So you don't need any type of adaptor? I so want to change my wheel to a Impreza one, one that looks like the momo wheel you have but says SUBARU would be cool. -Tom Link to comment Share on other sites More sharing options...
Okin Posted December 23, 2009 Author Share Posted December 23, 2009 So you don't need any type of adaptor? I so want to change my wheel to a Impreza one, one that looks like the momo wheel you have but says SUBARU would be cool. -Tom No adapter necessary. All you'll need after properly removing the steering wheel, is about 6 inches of wire to get the horn going. The hardest part of the whole thing was pulling the steering wheel off after it had been on there since the assembly line. Pretty straight forward except the wire part. I'll be removing it soon to sell it. I found an aftermarket Nardi I like. Link to comment Share on other sites More sharing options...
TheLoyale Posted December 23, 2009 Share Posted December 23, 2009 Cool, I'll have to do that this summer. Wiring is no biggie. Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now