Jump to content
Ultimate Subaru Message Board

Recommended Posts

Hello all, first day and first post.

Farkin' newbie questions...

I'm not much of a pavement guy and I still have no idea how to haul

rump roast on the road. I prefer dirt!

Anyway, I have been working with a few Nippon engines. All EJ 20's and all different. What I'd like to know is how to find out a bit more about each engine. Running serial #'s and the like.

Is there a site that I can type in the ID #'s and get year of manufacture?

That would be a start I guess..

 

TIA

Link to comment
Share on other sites

Welcome to the USMB.

 

Unfortunately, no there's not a site to my knowledge where you can type in the serial numbers. Are the engines you're looking at US engines or from overseas?

 

Overseas.

I'm working on stockpiling some of this info. If the list turns out well enough I'll share it here.

Link to comment
Share on other sites

dealers are going to be your best source for what year is a particular engine. this assumes that they have a cross reference list.

 

i would look here:

 

http://opposedforces.com/parts

 

you will have to start with a year and move on to the car and then engine, but it shouldn't take long to figure out as long as a ej20b comes after a ej20a or what ever the numbers are.

Link to comment
Share on other sites

dealers are going to be your best source for what year is a particular engine. this assumes that they have a cross reference list.

 

i would look here:

 

http://opposedforces.com/parts

 

you will have to start with a year and move on to the car and then engine, but it shouldn't take long to figure out as long as a ej20b comes after a ej20a or what ever the numbers are.

 

None of the engines I have have any post # identifications. They are all marked as EJ20's. No B, C etc etc.

Link to comment
Share on other sites

None of the engines I have have any post # identifications. They are all marked as EJ20's. No B, C etc etc.

 

all of the ejs i have seen here in the US have a vin # etched in the block on the passenger side mid point where it meets the trans. that should id them.

 

 

quote> Anyway, I have been working with a few Nippon engines. All EJ 20's and all different. What I'd like to know is how to find out a bit more about each engine. Running serial #'s and the like. <quote

 

 

if you do not have an id or serial number how are you expecting to look them up?

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...