ShawnW Posted February 6, 2004 Share Posted February 6, 2004 Vac line from the AT modulator valve, where is it supposed to go? Link to comment Share on other sites More sharing options...
GoldDiggerRoo Posted February 6, 2004 Share Posted February 6, 2004 I just replaced mine 2 weeks ago in my '83. My memory is a little fuzzy on it, but I think mine went to some sort of a "T" and then off to the carb. I coulb be wrong, but it's raining it's butt off now... I'm not gonna go check. Today is a great day to see if I have any holes in the floorboard of my subie, oh yeah... lotsa mud too. I love it! Link to comment Share on other sites More sharing options...
calebz Posted February 6, 2004 Share Posted February 6, 2004 I think any vacuum port on the manifold should work... Link to comment Share on other sites More sharing options...
CIS Subaru Posted February 7, 2004 Share Posted February 7, 2004 Yes, any straight manifold vacuum will do. I don't know if it really matters, but my 3spd has a special vacuum line connecting it to the manifold. It looks normal on the outside, but if you look into the end it is very small inside. I think it acts as some sort of bottleneck to limit sudden airflow. It may also just be a spring liner to keep the hose from collapsing. Link to comment Share on other sites More sharing options...
ShawnW Posted February 7, 2004 Author Share Posted February 7, 2004 I have a vac line left over that has a 1 way valve in it. Shawn Link to comment Share on other sites More sharing options...
beachbum Posted February 7, 2004 Share Posted February 7, 2004 hey shawn just to let u know on my 85 3spd at the line going to my tranny has a 1 way valve on it and thats the way it came from the factory. gluck Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now