brysawn Posted January 12, 2010 Share Posted January 12, 2010 I've got a new temp gauge, and I'm just wondering how you guys incorporated yours in? Pictures would be great Link to comment Share on other sites More sharing options...
rxleone Posted January 12, 2010 Share Posted January 12, 2010 Here's where my tach goes Link to comment Share on other sites More sharing options...
eulogious Posted January 12, 2010 Share Posted January 12, 2010 Here's where I put my boost gauge... Works great for me! Link to comment Share on other sites More sharing options...
donnieru Posted January 13, 2010 Share Posted January 13, 2010 here,s a link to my cardomain page. http://www.cardomain.com/ride/3226563. I put my volt gauge and oil pressure gauge in place of the factory digital clock. I used the stock plastic surround some aluminum and some contact epoxy. Link to comment Share on other sites More sharing options...
MilesFox Posted January 13, 2010 Share Posted January 13, 2010 i mount them under the heater control pod or on the other side, or both. The instrument bezel pops off and i will run the wires into the vent and out under the kick panel for easy hookup Link to comment Share on other sites More sharing options...
LPGsuperchargedBrumby Posted January 14, 2010 Share Posted January 14, 2010 i have a fuel air ratio gauge and a vacuum gauge mounted on the dash on each side of the raised bit that the instrument cluster sits in...lmao with the wires from the gauges running along the dash and out round the bottom of the windscreen pillar....WestCoast Kiwi style....rough as guts an twice as good... Link to comment Share on other sites More sharing options...
robert_the_sane Posted January 18, 2010 Share Posted January 18, 2010 Here's where I put mine on the BRAT:banana: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now